MagGuts +2 Conversion for Sig P365 Standard 10 Round Magazine (Not X/XL)

CVN038
(588 customer reviews)

$33.95

This conversion reliably turns your Sig P365 10 round magazine into a 12 round magazine with almost no length increase.  The spring, follower, and base are replaced with MagGuts™ components while the magazine housing is reused.  We pushed innovation through our “out of the box” approach to R&D and came up with a novel system that turns an already impressive capacity dense firearm into a weapon with a density of firepower that almost seems impossible.  With this conversion you will get:

  • Reliable feed and slide lock
  • 20% capacity increase with almost no sacrifice in length
  • Easy to load
  • OEM – like fit and feel
  • Highest quality spring and component materials used.
  • Cutting edge magazine technology [patent(s) pending]

Not compatible with X or XL models.
This item is not available for shipment to California.

SKU: CVN038 Categories: , Tags: , , , ,

588 reviews for MagGuts +2 Conversion for Sig P365 Standard 10 Round Magazine (Not X/XL)

  1. Donald (verified owner) –

    1. Your finger ledge is shorter which for bigger hands is a negative.
    2. There is no texture like the SIG original. I will most likely take them to a local laser firm and se if they can add texture. Especially given 1. above.
    3. The lower back lower corners stick out past the frame and create a sharp point that bites into your hand. I filed mine off to match the frame. They now feel great.

  2. Stan (verified owner) –

    Fast shipping and a fantastic product. I am buying these for all of my carry mags.

  3. Raymond C (verified owner) –

    It works

  4. DONALD BRITTON (verified owner) –

  5. Mark A. (verified owner) –

  6. Stan J. (verified owner) –

    Shipping was quick. Product seems to be of high quality. Installed with no problems at all.

  7. Dean Norby (verified owner) –

  8. David H. (verified owner) –

    Product: Excellent, install instructions: could be improved. I just installed my MagGuts but haven’t been to the range yet to test. I needed to view a couple YouTube “how to install” and the testing results videos for help, since the P365 instructions weren’t posted on the MG website. While the directions on the box make install seem easy, the actual install never goes as smoothly. This is my 3rd purchase, 1st for P365 and 2 previously for my Kahr CW380.

  9. Anonymous (verified owner) –

    Works great and adds little bit in length to the mag enabling a better grip. Highly recommended.

  10. Ray K. (verified owner) –

    I installed these +2 kits in my 10 round SIG P365 magazines. The instructions were easy to understand and the installation went smoothly. The mags now hold 12 rounds easily with no problems loading the 12th round.

  11. John (verified owner) –

    Very reliable and slide lock every time. I highly recommend these. I use these for my EDC.

  12. Mike (verified owner) –

  13. Peter B. (verified owner) –

  14. Ernest L. (verified owner) –

    It’s nice to actually get something worth what you paid for it.

  15. Steven B. (verified owner) –

    Ran two magazine loads to test with mix of ammo. Also left it sit loaded for a day prior. So far no mis-feeds, etc.

  16. Scott P. (verified owner) –

  17. Michael P. (verified owner) –

    have installed the unit but have not shot the gun yet. Installation was simple and easy. Have one installed on my Glock works flawlessly. Great product.

  18. Mark B. (verified owner) –

  19. Michael Martinez (verified owner) –

    Great product! Was waiting for something like this!

  20. Quang (verified owner) –

    Fantastic product. Ordered two. I ran a bunch of different ammo on this new +2 mag (Speer GDHP Short Barrel +P 124 Gr, Speer GDHP +P 124 Gr, Speer Lawman TMJ 124 Gr, Win Ranger T +P 124 Gr, Win Silvertip Defend JHP 147 Gr, Federal Tactical HST +P 124 Gr, Rem Golden Saber BJHP +P 124 Gr, Fiocchi FMJ 124 Gr, PMC Bronze FMJ 115 Gr). No a single hiccup. The only reason I didn’t give a 5 rating is this. The rear bottom corners are sharp and poking out. Not fun when you grip the gun. Not a major deal, however, since a little rounding out using a nail filer quickly solved this. Liked it so much, I just ordered 2 more.

  21. Anonymous (verified owner) –

    Always quality that works from Magguts!

  22. Jose Lopez (verified owner) –

    Works great like all your maguts

  23. Robert Bailey (verified owner) –

    Nice, seems to work as it should, will take to range!

  24. Robert G. (verified owner) –

    Simple to install and easy to load all 12 rounds and fire reliably, thanks.

  25. Kerry Coyle (verified owner) –

    Works like a charm plus it added about 3/16 inch to the overall length of the grip making it feel better in my hand.

  26. Richard (verified owner) –

    Great upgrade for my Sig P365, can’t comprehend the wizardry that lets you squeeze 2 more rounds into that tiny magazine. The springs and follower felt well made, the install was easy with good instructions and pictures provided. One small complaint was the bottom corners of the base plate protruded from the rear of the grip and were uncomfortably pointy. I do have 2XL hands that are on the “meaty” side, so problem might be unique to me, but it took less than a minute to round off the plastic corners slightly with some sandpaper. I even like the little brass button that locks the base plate in place, it adds a little accent to the modified mags.

  27. Kee (verified owner) –

    I have told many people about your product. I have really enjoyed your innovation.

  28. Scott P. (verified owner) –

    Great quality, functioning 100% so far. Used their internals for my S&W Shield for years; I have faith in this company.

  29. William G. (verified owner) –

    Work just as advertised

  30. Kevin F. (verified owner) –

    Installed easily. Haven’t tried them out yet. Covid has range shut down

  31. Anonymous (verified owner) –

    Works better than original with an older P365. It fed a variety of defensive and range rounds without any problems.

  32. Fernando C. (verified owner) –

    Tested both Magazines. Fired over three hundred rounds with both mags. No problems so far!

  33. Dwayne H. (verified owner) –

    Like added rounds but would like extended grip too

  34. Anonymous (verified owner) –

  35. Camden M. (verified owner) –

    It was already a game changer when Sig came out with the P365 and a 10 round mag! Now my 10 rounder holds 12! Awesome! Thanks MagGuts! I’ll be ordering a few more!

  36. John S. (verified owner) –

    An excellent product in every way. My primary reason for upgrading to these parts was because they were reportedly easier to load than the factory magazines. That turned out to be true, and I went from being forced to download the mags to easily having an extra two rounds over what the originals were supposed to hold (and was almost impossible to load). Highly recommended.

  37. Ron (verified owner) –

    Fast turn around easy installation perfect little product great addition to 365

  38. Mike Mueller (verified owner) –

    Great

  39. William Key (verified owner) –

    2 more shots and no increase in length. A little heavier but to be expected with 2 more rounds.

  40. Jon Bowman (verified owner) –

    It isn’t a plus 2 its a plus 1 and it added no length to the grip. I wanted a slightly longer grip. Overall the description isn’t correct. Had I know this I would have purchased new mags from sig.

  41. E.J. C. (verified owner) –

    Ease of installing and preformed flawlessly! Happy customer! Highly recommend!

  42. Michael M. (verified owner) –

    Excellent product. Super easy to install

  43. Michael (verified owner) –

    Great mag conversion! Works like OEM but 2 more rounds.

  44. Geno B. (verified owner) –

    It was fairly easy to put in however the follower kept sticking and not moving freely. I have not used it at the range so I don’t have a complete review yet

  45. Patrick M. (verified owner) –

  46. Alan S. (verified owner) –

    fits well easy to assemble

  47. YOUNG K. (verified owner) –

  48. Josh H. (verified owner) –

    So far so good!! As long as they stay reliable, what’s not to like?!?!

  49. Byron Ray (verified owner) –

    Love magguts I have this product for several different guns and they all work flawlessly. 1 or 2 extra rounds in the same size magazine its awesome. Buy it you won’t be disappointed.

  50. Gordon Weis (verified owner) –

  51. Orlando Gonzalez (verified owner) –

    the best is adding on to my 4 mags 2 each making an extra 8, wow awsome thanks

  52. Anonymous (verified owner) –

  53. Michael Brown (verified owner) –

    Extreme easy to install, and works perfectly. Also, for the flush mount mag, made it more than a paper weight as the baseplate allowed room for my pinkie on the grip.

  54. Daniel Brown (verified owner) –

    Excellent product. Simple to install. Haven’t had any issues.

  55. Vincent L. (verified owner) –

    Installed in minutes works flawlessly.

  56. Robert (verified owner) –

    The kit worked perfectly. It took maybe a minute to make the change. I did find that the sharp end edge (back of mag) had to be filed down and rounded off for my likes – but no big deal, a jewelers file and some 3000 grit sand paper made quick work of the modification. Very please and I highly recommend the kit.

  57. John Benson (verified owner) –

  58. Oliver (verified owner) –

    Fit perfectly. Don’t know why they don’t come this way from the gun makers. 12+1 in a compact package makes the Sig 365 a great ccw.

  59. Scott G. (verified owner) –

    Overall quality is great! However, there are a couple things holding it down one star. The very sharp/pointy edges on the back corners of the base plate really dig into the palm of the hand. I used a small file to remove those edges and it feels great now. The only other thing is that the front of the base plate is VERY smooth. I used a very sharp pointed neck knife to add some additional texture and now it feels like the rest of the grip module. I still highly recommend these base plates.

  60. Chase (verified owner) –

    Easy installation and very reliable. I did not have any feed issues after installed. The size is about a quarter inch longer than the flush fit.

  61. Michael (verified owner) –

    Couldn’t be happier.

  62. Phillip LaFlamme (verified owner) –

    Shipping was very fast, the new guts went in easy and I loaded up 12 rounds with no problems. Love it!

  63. Joshua (verified owner) –

    Great product. Works flawlessly!

  64. David (verified owner) –

    Pretty cool product and so far it works well

  65. Michael G. (verified owner) –

    Very easy install. Very little difference in length. Functioned perfectly through 3 reloads on first trip to the range. I expect it will continue for a very long time.

  66. CHARLES C. (verified owner) –

    Order was correct and delivery was on time.

  67. Martin HOMAN (verified owner) –

    At the moment I have not received my order yet. It’s been shown as late for delivery but no other information. I email magguts to get some info but have yet to hear from them yet.
    I will update my review if I ever receive my order.

    • admincorso (store manager) –

      Your order was shipped shortly after your order was placed. USPS is experiencing a lot of delays do to recent weather across the country. Packages are arriving at their intended destinations, but they are late. Please allow more time for delivery.
      We hope you will contact us with an updated review related to the performance of the product rather than the performance of the Post Office.

  68. Cory Ayers (verified owner) –

    I have not received my order yet. Please contact me.

    • admincorso (store manager) –

      Your order was shipped promptly after the order was placed. Many packages are delayed as a result of recent bad weather across the country. It is out of our hands once we ship it.
      According to tracking it is out for delivery today.
      We hope you will contact us with an updated review related to the performance of the product rather than the performance of the Post Office.

  69. Richard rambo (verified owner) –

  70. Jason DeVito (verified owner) –

    Have not gotten them yet

  71. Christian H. (verified owner) –

    Works as advertised adding 2 additional rounds. Few issues 1. Seemed to be lose and rounds/spring would shake issue seems to have corrected itself on this one (not 12rnd kit) overnight no shake if heard. 2. The pinky extension is not stippled like the one that comes from the factory (not a big deal but something to be aware of) 3. The back corners of the bottom of the mag can be a bit sharp just need to be filled down so they don’t dig into your hand. Otherwise great product so far still need to test at the range to see if it will be reliable.

  72. Larry (verified owner) –

    I have not yet received my order, so I am unable to provide an accurate review as requested by the email. Perhaps you should generate the review request after you have delivery confirmation.

  73. Rickey H. (verified owner) –

    Once contact was finally made from support, replacement was offered and the replacement worked without issue.
    This review was updated by the customer.

    • admincorso (store manager) –

      The converted magazines definitely have plenty of force to operate extremely reliably. Please see an email sent from support. We will take care of your issue one way or another.

  74. Stephen (verified owner) –

    fits exactly as expected! plus 2 on a magazine is always a plus, thank you! more power to your company!

  75. Robert (verified owner) –

  76. Jordan D. (verified owner) –

  77. Andrew (verified owner) –

    Feeds perfectly and loads with 12 rounds without a lot of effort, love it!

  78. William Trilk (verified owner) –

    Only have couple hundred rounds through them but 100% reliable and 12 do load easier than previous 10.

  79. Andrei Nicolau (verified owner) –

  80. Matthew S. (verified owner) –

    I found it easier to get 12 rounds into the mag with the MagGuts kit installed than it was to get 10 rounds into the original mag. Shooting it 12+1 with 115 FMJ, 124 FMJ and 147 Federal HST I had no malfunctions in the first 150 rounds through the MagGuts equipped P365. Very good initial impression.

  81. Anonymous (verified owner) –

  82. Edward Eazarsky (verified owner) –

  83. Anonymous (verified owner) –

    Gets 5 stars based on quality, easy to install and that I know it will work flawlessly just like the magguts I put in my Kahr CT380

  84. Anonymous (verified owner) –

  85. kay b. (verified owner) –

    Installation was quick and easy. Have shot a few hundred rounds through these without failure. Great Product

  86. Jatniel Rodriguez (verified owner) –

    Took out to the range rand about 200 rounds and functioned fine with all sorts of ammo plus P and reloads as well I will start carry with these. I think they are pricey for what they are priced at about 25$ I think would be more reasonable and would make me buy more but the fact that you can have plus 2 rounds in a frame so small I think is worth it and it’s impressive how they don’t any any real noticeable length to the magazine.

  87. Michael A. (verified owner) –

    Also works as described. Easy install

  88. Micah H. (verified owner) –

    Love the addition of 2 extra rounds! There’s a subtle rattle when the mag is in the firearm, but I’m hoping that’ll go away after some time.

  89. Joel (verified owner) –

    Easy install, works as advertised, +2 🙂

  90. George NEWHOUSE (verified owner) –

    Could only got one extra round in a 10 round mag.

  91. Christopher Sizelove (verified owner) –

    Fantastic quality. There’s a reason why they are highly reviewed. I have LCP, LCP II, P238, and P365 kits.

    Here are my two complaints. It doesn’t matter if your order is $240, you will still pay shipping. I think they could do a free ship policy for orders over $100. And then second, they haven’t had LCP II kits in for years. And I need 6. Been needing 6 for years. So I give 4 stars.

    But otherwise, I can’t say a bad thing about the products.

  92. James S. (verified owner) –

    So far these have been great! Simple installation, and they have functioned flawlessly what I’ve gotten to run em. Will be purchasing for any additional mags I get in the future.

  93. Wade Hermes (verified owner) –

  94. Richard Dillon (verified owner) –

  95. David A. (verified owner) –

    I’ve not shot the mags after installing the kit. But they strip rounds by hand better than stock. Plus they load a lot easier. The only negitive I can think of is the base has some sharp corners. But that is a easy fix with a nail file. I’m pretty satisfied with the kit.

  96. Anonymous (verified owner) –

    It feels weird when installing it. The original sig mags are not the same quality as walther, however, the magguts are freaking amazing!
    They work extremely well and hold 14 + 1 in my 365. 14. That’s insane!
    T
    Magguts deserves respect and business.

  97. Phillip L. (verified owner) –

    Great product. This is my third set of guts I love how it does not make my mags longer just ups the capacity. Brilliant!

  98. Philip B. (verified owner) –

  99. Derek M. (verified owner) –

    What an awesome design. Cycles flawlessly. People almost don’t believe me when I tell them this little magazine is packing 12 rounds of 9mm defense thanks to Magguts!

  100. greg casura (verified owner) –

    Works great!!! Nice engineering!

  101. William D. (verified owner) –

  102. Ryan W. (verified owner) –

    Jammed constantly with a few brands of ball rds. Mags were cleaned before testing.

    • admincorso (store manager) –

      The converted magazines should work perfectly. It sounds like something is wrong. Please refer to an email we sent from support to help you get things working as they should be.

  103. Ivan Cheng (verified owner) –

  104. Chris K. (verified owner) –

    Great product. Well made, unique design…and works as intended. I’ve already started spreading the word to my friends at the range.

  105. Anonymous (verified owner) –

    Great!

  106. Matthew (verified owner) –

    Bought 3 of the Sig P365 +2 for 10 Round Magazines. After a few hundred rounds all three are functioning perfectly without any issues. It is amazing to have 12+1 available in such a small package. Well done.

  107. Edgar Alain Flotte (verified owner) –

    works excellent with all sorts of ammo including Underwood +p+ penetrator “boutique” ammo. A++

  108. Mac P. (verified owner) –

    Great product-Easy install

  109. Steven H. (verified owner) –

    These things are great. Easy to install, work great. A little pricey but what can you do?

  110. Kevin R. (verified owner) –

    Product works as designed. Loading is easier. 2 more rounds without added bulk, this is a win/win.

  111. GARY (verified owner) –

  112. PAUL E. (verified owner) –

    Tried and tried, even contacting customer support, but could not get it to work. I used a new, never used, OEM Sig magazine. The last two or three when loading were next to impossible to get in the magazine, and about half the bullets were nose down. There may have been a defect with my particular product. Support staff was trying their best to help and the company willingly accepted my return. Easy folks to work with.

  113. Ed F. (verified owner) –

    Good product! This was the first chance I had to try these new mag springs/followers since purchase, and I was pleased. The magazines load smoothly and feed the same way. Springs are stiff to load with a thumb, but I figure that will change in time. Using a mag loader makes loading a piece of cake. I put 50 + rounds thru the gun this morning using 2 magazines and suffered NO FTF, stovepipes, FTE’s.
    I’m happy !! Nice work!

  114. Richard (verified owner) –

    Works great.

  115. Anonymous (verified owner) –

    Very well made, works as advertised, that extra 2 has still put my 365 in top spot for carry 👌

  116. John Carbone (verified owner) –

    Only reason I gave the sig a 1 is because the spring is not compatible with my extension grips. In other words the spring button on the bottom does not secure into my extension grips

    • admincorso (store manager) –

      The MagGuts base that comes with the conversion must be used. Other aftermarket grip extensions cannot be used in combination with the MagGuts parts.

  117. Bradley Swinehart (verified owner) –

  118. David Fortschneider (verified owner) –

    Works great! Now can you get +2 for the P938 7 round?

  119. David Moore (verified owner) –

  120. erik prophitt (verified owner) –

    Top part doesn’t fit right keeps flipping side ways no matter what I do it will not stay flat

  121. Anonymous (verified owner) –

  122. Jonathan W. (verified owner) –

    Disappointed. My main complaints are:

    1. Pinky ramp is smaller than the OEM extended 10 round mag. The factory extension was barely adequate for me.
    2. No stippling on at all on pinky extension. Combined with the smaller extension hand feel is greatly reduced.
    3. Sharp hot points on rear of extension that 99% of users complain about and modify (easily) at home. Shame on you Magguts.
    4. The follower is a muted red color, hunter orange would have been a nice touch. Follower is also not as nice as the OEM option as it has a significant hole when the mag is empty.
    5. Price. At nearly the cost of the brand new OEM mag, I expected better.

    I am a long time customer of Magguts on a few firearms.
    This could have been a homerun product like the +2 for the OEM P365 12 round mag. Instead of taking advantage and continuing Sig’s ergonomics Magguts struck out for me with poor design, and fitment. I wanted to like this product, but I will carry the OEM extended 10 round mag, with a +2 12 round spare mag (which is pricey still, but great).

  123. Chris M. (verified owner) –

  124. Anonymous (verified owner) –

  125. Malcolm Rodatz (verified owner) –

    Very good product and very fast shipping.

  126. Anonymous (verified owner) –

    You cant go wrong with this product, took about two minutes to make the change.

  127. Anonymous (verified owner) –

  128. Jonathan (verified owner) –

  129. Robert Ellison (verified owner) –

    Excellent product, exceeded my expectations and would highly recommend this to anyone owning a P365.

  130. Shane (verified owner) –

    As described and zero failures in 200 rounds I’ve shot so far. Delivery was well with in reasonable time. Thank you!

  131. Tony (verified owner) –

    Seems like a great product, edges and back corners are a little sharp and could use some smoothing to be more comfortable. Also the plastic injection point is very obvious.
    Great fitment, holds 11 rounds very comfortably, the 12th is as tight as #10 in factory form.
    Shipment was quick; would recommend this product so far, testing is still needed to see if it functions as intended in the real world.

  132. Anthony Walk (verified owner) –

    Great!!

  133. Ernesto (verified owner) –

    Very easy to install and work perfect. Amazing

  134. Anonymous (verified owner) –

  135. Anonymous (verified owner) –

    Easy to install and works great! Highly recommended to any P365 owner.

  136. Donald A. (verified owner) –

  137. William Barber (verified owner) –

    Works great. Flawless performance. Works exactly as advertised.

  138. James C. (verified owner) –

    This is my 2nd set. As soon as I saw how well the first worked I ordered another. They work great. The two extra rounds is a terrific upgrade.

  139. Dave A. (verified owner) –

    Works fine so far.

  140. Jason D. (verified owner) –

    Awesome product and works flawlessly

  141. Brian (verified owner) –

    As described and functions perfectly.

  142. Rommel (verified owner) –

    Excellent

  143. Anonymous (verified owner) –

    Didn’t think the p365 could hold more rounds but these guys crushed it. Feeds well, locks the slide. Highly recommend.

  144. Anonymous (verified owner) –

    Its really a great product…

  145. CHARLES M. (verified owner) –

    10 Round base plate should be a tad longer. Look at a Pierce pinky extension from NDZ PERFORMANCE.COM- for P365 Sig Sauer

  146. Bryan (verified owner) –

    200 rounds through it. Works well.

  147. Salvatore C Vieni (verified owner) –

    Love this so much!!! Works flawlessly install was easy!

    I would greatly buy again if you did this as another kit that was +3 instead of +2 and def waiting for the addition to the 15 round mag.

  148. Jerry B. (verified owner) –

    Just what my son wanted!

  149. Anonymous (verified owner) –

  150. Ronald H. (verified owner) –

    Great customer service great product

  151. Kevin T. (verified owner) –

    Easy to install and works as expected!

  152. Enrique (verified owner) –

    Very happy with the investment and craftsmanship work. Worked well upon use. Really happy with the capacity increase. One of the things with the P365 is you want it to be small but lacks in capacity. MagGuts let’s you increase capacity and still keep your gun concealed.

  153. Anonymous (verified owner) –

  154. Ron (verified owner) –

    So far so good, cycles normal, easy to install. I saw that some said it didn’t hold two extra- it does the last round is tight. As far as the sharp edges, it’s not really “sharp” because it’s plastic. It is a little pointy though, and yes a slight buffing and rounding of the two corners with a Emory board (fingernail sander) made it smooth and a great fit. Yea a lil pricey but worth it IMO. Will buy one for all the mags we have. Not sure why industry hasn’t gone to flat springs yet.

  155. Craig (verified owner) –

    Great product. Easy to install.

  156. George B. (verified owner) –

    This is a great product. It installed with ease. The rounds feed flawlessly
    Very happy I bought this product

  157. jimmy r. (verified owner) –

    The ‘GUTS worked just fine! Installation was a breeze.

  158. Eugene T. (verified owner) –

    Good set, but expensive

  159. Anonymous (verified owner) –

    Quality stuff as always from MagGuts!!

  160. Mike Reeves (verified owner) –

  161. Robert (verified owner) –

    Great product easy to install and load. Needed to file off the corner of base because it rubbed against my palm. Would have appreciated a slightly longer grip, otherwise I really like the product. I plan on ordering more.

  162. FREDDY MARIN (verified owner) –

    Excelent product

  163. Jon-David Banks (verified owner) –

    Very pleased!

  164. Bernard M. (verified owner) –

    Fast shipping. Easy installation. Only put 100 rounds through each mag, but zero failures of any kind… And no noticeable addition in length. I wasn’t sure when I ordered them, but I am so glad I got these!!!

  165. Howard (verified owner) –

    I purchased the 365 & the 365xl &2. I put a total of 500 rounds between the 2 and the worked just as they should. I have total confidence in this product and this company.

  166. Thomas Gardner (verified owner) –

    I have been using Magguts spring assemblies since the beginning. Smith Shields, sig P238, Sig P365 and 365x. No malfunctions through hundreds of rounds. All my Carry guns have Magguts.

  167. Dave Rogers (verified owner) –

  168. robert b. (verified owner) –

    Very easy to install and feeds at least as well as the original. I will be purchasing more of these for all my P365 mags!

  169. Jason F. (verified owner) –

    great product and shipping, very happy, would recommend and will buy again.

  170. Anonymous (verified owner) –

  171. michael (verified owner) –

    Took 3 mags fully loaded to qualifications . They performed flawlessly no jams….no feeding problems no malfunctions!!!! worked great!

  172. Alison Rhyne (verified owner) –

    I bought these because my new 14 round magazines are awesome. These functioned perfectly at the range

  173. Robert Dye (verified owner) –

  174. John Bear (verified owner) –

    This innovative addition to an already cutting edge, every day carry technology is both amazing and necessary for those who take protecting the innocent from the wolves seriously.

  175. David B. (verified owner) –

    Very easy install. Functions great and makes reloading the p365 mags easier!

  176. Cameron S. (verified owner) –

    Huge improvement. Far easier to load and better capacity

  177. Micah Wells (verified owner) –

    I purchased 2 of these for the standard 10-rounders that came with my P365 originally…they feed PERFECTLY and after just a few loads and unloads it’s easy to load all 12-rounds with just my finger tips! The amount of length they add is right between the factory flat baseplate and factory ‘pinky’ extended baseplate. (Not much at all!) It’s crazy to have 13-rounds of 9mm capacity in my front pocket! True these are a bit spendy but worth it in my book.

  178. Ron R. (verified owner) –

    Amazing product. Works great, looks great, still conceals great.

  179. David (verified owner) –

    Very happy with it. Easy install. No problems loading last couple rounds in it (unlike the stock 10 rounder). Seated perfectly with just the right amount of force. Feeds perfectly with no issues and, best of all, adds less to the handle length than the stock pinky extension mag but still has enough meat to get a good grip on. Makes it pefect for pocket carry. Will definitely buy another for the other stock 10 round mag that was included.

  180. Anonymous (verified owner) –

  181. Kyle L. (verified owner) –

    Feeds and cycles perfect, love having the additional rounds.

  182. John S. (verified owner) –

    Quick shipping, excellent product!!

  183. David R. (verified owner) –

    Very easy install, and great reliability so far. My only issue is the sharp points at the rear of the new baseplate. Like many have said, I had to file off the sharp points, now it feels great. I would like MagGuts redesign the 10 round baseplate and send the new baseplate to all the customers who ordered the first version.
    All in all, great product and have already recommended it to people with the p365.

  184. Douglas S. (verified owner) –

    I got a notification that the order was processed, but never did get a shipping notification or tracking number. In the big picture of things, these didn’t matter. The product arrived in what I’d consider a timely manner. It installed without any problems. Loaded my 12 rounds into my, formerly, 10-round magazine with no problems. I haven’t shot it yet, but once I do, and if all goes well, I’ll be ordering a +2 kit for my Sig 12-round magazine.

  185. Ernesto (verified owner) –

    ease of installation and function was good but the design places a sharp corner on the back of the mag shoe that pokes the shooter hand when weapon is fired.

  186. Ken C. (verified owner) –

  187. John Armstrong (verified owner) –

    Spring kit went right in with no problems, haven’t tried it yet but I’m sure it will be fine

  188. ROLANDO A. (verified owner) –

    Was happy and surprised how good it works 12 rounds in a small package 2021.

  189. Justin L. (verified owner) –

    10/10!!! Looks factory and works every time! You might have to shave off some plastic on the back of the base plate as I did, it was protruding and digging into my hand. Just a heads up. WOULD Recommend

  190. Alan G. (verified owner) –

    So far so good. Works as advertised. We will see how it functions over time.

  191. Brian E. (verified owner) –

    Great product. Easy installation.

  192. Kenny (verified owner) –

    Shipping was quick and nk installation was a breeze. Havent took it to the range yet but seems to function as it should

  193. Dan g. (verified owner) –

    I’d love to give this 5 starts, but it’s been over 2 weeks and I haven’t received it yet. But the company made damn sure to send me an e mail asking me to rate their product. So here you go

  194. Fredric T. (verified owner) –

    great service, trouble free installation

  195. Patrick C. (verified owner) –

  196. John M. (verified owner) –

    I have had Magguts in my P3AT and Kahr P380 for some years so I know how well they work. I also have one in my P365 12 round mag and bought the latest for my P365 10 round mag. Well built and I have never had a failure with them.

  197. Lloyd Elliott (verified owner) –

    I bought for the P365 10 & 12 round mags. They work great! I managed to install the spring backwards in the 10 round mag. Consequently the brass bead does not center and you can only get 11 rounds in.
    Fortunately customer service recognized my mistake and once corrected all is well.
    2 additional round in each mag and I can’t tell a difference in the grip length.
    I will be ordering a few more soon.

  198. Thomas (verified owner) –

    Works well. Shipped fast.

  199. Ken B. (verified owner) –

  200. Derek M. (verified owner) –

    Great product. I’m glad the 10rd flush fit mag didn’t get skipped in these spring kit offerings. My wife carries flush fit mag because she needs a smaller profile handgun to fit her body type and clothing style. She also prefers to carry flush fit mag for backup because it’s easier to conceal with women’s pant pockets. So I got her two of these. Now she has 12rd flush fit mags for standard Sig P365. Awesome! I’m considering carrying one now.

  201. Anonymous (verified owner) –

    Fixed my 10 round magazine problem and added 2 more rounds at the same time

  202. Theodore (verified owner) –

    Haven’t taken out to shot but all fiction checks are a go very happy with the 12+1 in such a small package

  203. Anonymous (verified owner) –

  204. Robert B. (verified owner) –

    Range use approved by me. Still working with them to determine if I’m going to use for edc.

  205. Chip (verified owner) –

    Great service and communication.

    Two-day delivery. We are in the same state.

    Installed easily, although the spring has a lot of spirit.

    Mag baseplate on the 10 rounder is just a freckle longer than the factory one, enabling me to keep my little finger on the mag during firing. I couldn’t do that with the factory mag plate
    Saw a couple of reviews mentioning initial small problems with jamming. Duplicated the conditions, but couldn’t induce failures.
    After messing with the mags and leaving them loaded for a week, I could actually get the last 2 rounds in the mag without a mag loader.

    I have an optional factory 12 round mag. It works fine, but it can be a bit obtrusive when sitting if carried OWB.

    I absolutely cannot get the last two rounds in that one without a mag loader. I haven’t touched it since I got the two converter kits for the 10 mags.
    I may get the kit to convert the 12 round mag to 14 rounds in the near future, just because of the shorter extension on the baseplate.

  206. Terry McDowell (verified owner) –

    Great product!

  207. Vince (verified owner) –

    These work great with ball ammo and 124 plus p HST ammo. Easier to load than factory mags. Did have to file off plastic corners of bottom plate.

  208. Kenneth R. (verified owner) –

    Excellent product that has proven to be 100% reliable

  209. Karl (verified owner) –

    Excellent product, works perfectly, easy to install and significant increase in capability! Highly recommend.

  210. Kevin D. (verified owner) –

  211. William (verified owner) –

  212. Martin (verified owner) –

    Good product and fast delivery. Thanks

  213. Terrance J. (verified owner) –

    Great add to my 10 rounder

  214. Paul Davis (verified owner) –

    installed easily ran several mags through without any issues{10 to 12 round} the only problem was then sharp corners on the base plate a little 600 grit paper works great to smooth the corners looks great and feels comfortable. . now to buy the 12 to 14 round guts.

  215. Edward (verified owner) –

    Fast ship. Very nice quality and perfect fit. Looking forward to range test!

  216. John Bear (verified owner) –

  217. Rodney (verified owner) –

    A very practical mod. I’m very impressed with the quality of this product. Seems overpriced (should be <$25) but is well engineered, functions well, installs easily, innovative flat spring and components, good spring tension, and amazing form and fit to get 2 extra rounds. Much easier to load manually than OEM mags. Sharp corners are easily filed or sanded. Makes an already incredible pistol amazing.

  218. Carl (verified owner) –

    12 round flat base? Hells yeah!

  219. Terry (verified owner) –

  220. Donald R. (verified owner) –

    Super easy to install, increased capacity with the same footprint, what’s not to like? Going in for two more soon!!

  221. Jed (verified owner) –

  222. Melvin M. (verified owner) –

    Highly recommended option for 365 Sig

  223. Anonymous (verified owner) –

    100 rounds flawlessly!

  224. JARED VOGLER (verified owner) –

  225. Tyler R. (verified owner) –

  226. Paul (verified owner) –

  227. alexander w. (verified owner) –

    I was skeptical that this would work reliably and was pleasantly surprised after testing different ammunitions. Fed reliability and locked up and the only slight criticism I would have is something already expressed by others, namely sharp corners at the bottom of the magazine. I would suggest you polish these at the factory, as I have done at home.

  228. Jody Fryer (verified owner) –

    Great product and Customer service!

  229. Stephen N. (verified owner) –

    Good easy to follow directions. Fast shipping.

  230. Brian T. (verified owner) –

    Does what I want, 2 more rounds w/o increasing gun height. Need to ensure mag follower lines up when loading first round. Feeds flawlessly. One failure to lock slide after last round fired. A good product that meets the need.

  231. Danny Y. (verified owner) –

    Work as your advertisement. Recommend

  232. Alan Wisthoff (verified owner) –

    This is a nice product. A little pricey, but in my opinion it’s worth it. It’s always nice to have more ammo available, and still maintain the same size magazine. Good job!

  233. Patrick D. (verified owner) –

    Fast shipping and great spring

  234. Chase M. (verified owner) –

  235. Anonymous (verified owner) –

  236. Ari Lovato (verified owner) –

    Love them, magGuts in all four of my sig 365’s . The extra rounds are worth it . they also catch slide way better then the 365 magazine spring does after last round . I bought two then another 3 more . I not only recommend them and have tested 300 rounds on couple of them no issues at all . Yes I feel safe having those extra rounds and with no extra length on pistol, I’m getting more . I actually use my ten round mags now lol. 😎 thank you sooo much .ARI

  237. Lee (verified owner) –

    Works perfectly. Rounds cycle great.

  238. Matthew B. (verified owner) –

    No problem getting all 12 rounds loaded in the mag. No cycling issues while firing. Great option to add a pinky extension and 2 rounds.

  239. Anonymous (verified owner) –

  240. Steve S. (verified owner) –

    These fit and look very much like the 10 rd magazine with flat baseplate that comes standard with the Sig p365. Would have preferred a “pinky” extension, but I can still get a better grip than the original which I expect wouldn’t have gotten much use.
    The extra capacity just blows my mind 12+1 in a “pocket” pistol, outstanding! Installation was a snap, quality, function, etc., all good. I converted 4 of the 7 mags I have, so the red followers make it easy to tell them apart.

  241. Ari Lovato (verified owner) –

    Awesome, putting them in all four of my sigs 365 , they work better and the extra capacity. Wow . Love them .

  242. Zachary D. (verified owner) –

    Great product and fast shipping!

  243. Philip Van Cleave (verified owner) –

  244. Barry B. (verified owner) –

    Magguts is the first item to buy after purchasing your new pistol! Provided a kit is available for your make and model pistol. I have bought about 10 kits from them for various pistols I own. All worked as well or better than OEM. I just wish they offered replacement parts for their kits, as I anticipate needing replacement parts in the future.

  245. Gary K. (verified owner) –

    EASY install and fits perfectly.

  246. David C. (verified owner) –

    Easy install and works great.

  247. Charles K. (verified owner) –

  248. Jason M. (verified owner) –

    Very pleased with my product. Easy to assemble!

  249. Shane (verified owner) –

  250. Loretta (verified owner) –

    Gift for my son.

  251. TERRY M. (verified owner) –

    Excelent product and company.

  252. Doroteo (verified owner) –

    Good quality components with excellent fit and finish

  253. Michael B. (verified owner) –

  254. Randy N. (verified owner) –

    Pricey but functions flawlessly!

  255. Wayne Friedt (verified owner) –

    Great!

  256. Ari Lovato (verified owner) –

    Love them switched all of my sig magazine springs to magGuts .

  257. terry moore (verified owner) –

  258. Anonymous (verified owner) –

    Fast shipping, great price, great product. Wishing there was a kit for my p320

  259. jack rigoni (verified owner) –

    Great

  260. Alex P. (verified owner) –

    The lack of grip texture is disappointing; almost makes me want to backwards engineer your baseplate and 3d print my own….but I’ll end up purchasing your 12rnd xl kit anyway.

  261. Anonymous (verified owner) –

  262. Anonymous (verified owner) –

    I’m a big fan of MagGuts+1, and I have been using them in some of my CCWs including G42, G43, and LCP. They all have been working reliably as designed. So, I was hoping that these MagGuts+2 for the P365 would also work. Nope, it was not the case. I fired 84 rounds of HST 124gr with two MagGuts fitted OEM mags and I had 4 fail to feed malfunctions. My P365 with the two stock mags had not had any malfunction with Federal HST or other JHPs. Unfortunately MagGuts for the P365 are not as reliable…

  263. Paul S. (verified owner) –

    Received wrong product, got a 12round instead of 10

  264. Fernando G. (verified owner) –

    It adds a bit more length to the magazine than the one for the 12rd mag but in a way it’s better that way so now my used to be too short mag have a bit more to grip my pinky finger to.

  265. John D’Agnese (verified owner) –

    It’s a little tricky to install, but it’s AMAZING after! Great product, HIGHLY recommended!

  266. Anonymous (verified owner) –

    Great product!

  267. Anonymous (verified owner) –

    Great product and company!!!!!

  268. Andrew (verified owner) –

    Awesome customer service

  269. Alfred Biondo (verified owner) –

  270. Thomas (verified owner) –

    Excellent products, excellent service. Your spring kits work flawlessly in my SIG and Ruger pistols.

  271. Richard H. (verified owner) –

    Big fan of MagGuts

  272. Brian Drinkwine (verified owner) –

    Not hard to install. A bit of trial and error. Works great, no feeding issues at range night.

  273. Chris B. (verified owner) –

    I am happy with the product. It seems to work as advertised. However I have not been to the range. I have a feeling that there is the potential for the follower to bind up of it tilts as it’s really narrow. But Parts had to get smaller to add 2 rounds to capacity in the same size mag. I also have noticed the back
    Of the bottom plate is not matched to the grip it’s more squared off. And provides a bit of a sharp point in your side. Nothing a little sand paper can’t fix. But it would be nice if they were rounded instead of square.

  274. Dave Rogers (verified owner) –

    Great upgrade product for the P365, makes great even better.

  275. Luis Pizarro melendez (verified owner) –

  276. Justin B. (verified owner) –

    Just installed and so far so good.

  277. Ken M. (verified owner) –

    I had problems with the 12 round spring. I didn’t try the 10. Returned both. Excellent customer service.

  278. Robert (verified owner) –

    Everything about this product and the company order procedure was first class.

  279. Bruce C. (verified owner) –

    Works as advertised, adds 2 extra rounds but only a small amount of extra printing. Quite satisfied

  280. Preston Spencer (verified owner) –

    Very pleased

  281. B. J. (verified owner) –

    A premium product with excellent materials and engineering. Fit, function and reliability are 100%. My order was efficiently processed and shipped. I rate these 10 round +2’s at a low 3 due to the sharp corners on the rear of the base plates. They come to a sharp point that then gouge the base of the palm in recoil. I used a 100 grit sand block to round off those sharp edges and it took away their “bite”. Given the premium price this is an oversight on the base plates that should have been caught at the line level and corrected prior to placing them on the market. They are in contrast to the correctly radiused rear base plate corners on the 12+2 units that I purchased. One other point. The directions refer to an installation video on MagGuts website. There is no video posted for the Sig P365 for those that may have difficulty with the directions on the card in the package.

  282. Anonymous (verified owner) –

  283. Anonymous (verified owner) –

  284. Robert (verified owner) –

    Great product. Pinkie ledge could be slightly larger.

  285. Terry Gillard (verified owner) –

    Fantabulous as always!

  286. Greg (verified owner) –

    Bought four for all my 10 round mags. Good order process, quick shipping and high quality workmanship. Installation was a breeze. No issues. Expensive, but highly recommended by friends with P365s.

  287. Israel Cuevas (verified owner) –

    I purchase your 10+2 mag spring for my P365 and i had to ship order to my daughters house in New Jersey do company donot ship to P.R. It was received fast . My daughter show me product thru video call and up to now it seems fine. Lets see when arrive to my house and i do the mag conversion..hey guys… here in P.R we are a large group of owners of sigsauer so youre loosing big money and good customers..also veterans and we are part of America honoring the 2nd amendment..please add P.R to your shipping please!

  288. Carl (verified owner) –

    Easy to install. Works well. Ran 200 rounds through it yesterday. No issues.

  289. Jonathan (verified owner) –

    Outstanding products AND service! I’ve installed 30-40 MagGuts kits and they’ve all worked flawlessly and even increased reliability in my Kahrs (stopped the nosediving of the top round that Kahrs are known for) and maintained the reliability in my other guns while adding capacity. I was excited when I heard they had ventured into double stacks with the P365 – I’ve now installed maybe 15 of these kits. I got cocky about my tenth one in and let a spring slip out during installation which caused it to deform (the only issue I’ve ever run into with one of their kits) – they promptly sent me a replacement as part of the warranty despite me acknowledging it was my error.
    I use these daily and recommend them to others.

  290. MItchell C. (verified owner) –

    Was a little difficult to get the first round started when losing but otherwise great!

  291. George (verified owner) –

    With the magguts kit for the 10rd magazines installed, there’s no other 9mm pistol containing 12+1 rounds, smaller than the Sig365. I’ve got 13rds of 9mm in a front pocket holster that I can carry year round in a pair of cargo shorts.

  292. Steve (verified owner) –

    Great way to convert the standard flush P365 magazine to an extended magazine with 12 rounds. Easy to do and works flawlessly.

  293. MITCHELL JOHNSON (verified owner) –

  294. Donnie Thompson (verified owner) –

    I should have ordered 2 , to brag to all my friends , this mag works great with no problems what soever.

  295. Mark (verified owner) –

    Swapping out factory springs to Maguts springs was easy. The slightly longer base on the mag is almost undetectable and the extra two rounds and ease of racking a full mag are both huge benefits from the maguts install on Sig P365

  296. Timothy (verified owner) –

    awesome as always! Two extra rounds and ALWAYS A FACTORY SPRING UPGRADE! magguts are the best! Every product they have from Kahr pm9-40 to the Colt Mustang, Bodyguard, Shield, and now the Sig P365. BEST UPGRADE YOU COULD DO!

  297. Blane B. (verified owner) –

    Doing great so far. Very easy to install, mags look good.

  298. Anonymous (verified owner) –

    Excellent product

  299. Anonymous (verified owner) –

    Your product works great no problems, will buy from you again. Now the U.S. Postal service, which shipped it to me, gets a D+. It took them forever to get the product to me.

  300. Derek (verified owner) –

    Great product. It is shorter in length compared to the standard sig 12rd mag. I bought 3 more. Then I bought some for the XL grip.

  301. Anonymous (verified owner) –

    great item!!!

  302. Craig M. (verified owner) –

    The best $34 you’ll ever spend. To go from a 10 rd magazine on my Sig P365 SAS to a 12 rd capacity without changing the footprint is amazing!!!

  303. howard tarvit (verified owner) –

    these made a troublesome mag even better then it should have been

  304. George Georgiev (verified owner) –

    Excellent!

  305. Thomas (verified owner) –

    Product was easy to install and arrived ahead of schedule. Will know more regarding performance after a trip to the range. Product adds about 1/8 inch to the overall length of the flush mag, which is more than an acceptable tradeoff for the increased capacity of two additional rounds. Back edges of the base plate are sharp and need to be rounded off with sandpaper so as to not dig into shooters hand when gripping the firearm. Took about 30 seconds to fix, but for the price should arrive to the customer already smoothed out.

  306. Anonymous (verified owner) –

    Fast shipping

  307. Anonymous (verified owner) –

    Quick shipping. Product works as advertised

  308. David (verified owner) –

    Contents were well packages and install was straight forward. Seems to be of high quality. Have yet to get to the range but so far seems great!

  309. Anonymous (verified owner) –

    Great product. The only complaint is that when slide is back it gets stuck and won’t allow slide release to release the slide to the forward position.

  310. Ken (verified owner) –

    The product works well as described. The feeder sits higher than a stock magazine which concerned me initially as I thought I had installed the spring incorrectly. Apparently, that is just the way it is. Pictures & instructions do not mention this so keep it in mind. I haven’t fired the pistol yet to confirm performance but have loaded rounds & ejected rounds successfully.

  311. Zack L. (verified owner) –

    Easy install and it feeds better than the factory 10 round magazine that came with my p365

  312. Chase K. (verified owner) –

    I have ordered 3 of these and they are great. I keep them stored loaded and over time they are still reliable and have not had a single issue. The only problem I experienced is with the +2 kit for the 10 round mag. The corners of the base plate dig into my hand. I took a file lightly to the corners and it is very comfortable now. The +2 for the 12 round mag did not need any minor filing/sanding. The base plate adds less than 1/4 inch to the length of the flush fit 10 round mag. Great products

  313. Anonymous (verified owner) –

    The changeover was done is less than 3 minutes. Haven’t taken to the range yet, but it does load/unload 12 rounds. My only suggestion is to develop different magazine base plates. The P365 flush base plate doesn’t allow for the pinky finger to grip the magazine. This is also true of the MagGuts replacement. I’d like to see an extended base plate, similar in size to the P365 extended plate.

  314. Esteban (verified owner) –

    This product is a real breakthrough I’ll be buying another soon, keep going!!

  315. Charles S. (verified owner) –

    Excellent product. This is my second purchase.

  316. richard roberts (verified owner) –

  317. Aaron (verified owner) –

    Incredible product! Great price! Detailed instillation instructions and worked perfectly so far. No feeding issue on first mag dump. Thanks! You guys are innovators! Wish the OEMs could keep up.

  318. william stevens (verified owner) –

  319. John Zamaites (verified owner) –

    Parts did not work. Need to return asap. No return paperwork provided. John.zamaites@gmail.com

  320. William Blair (verified owner) –

    I am interested in your new Shield magazine expansion kits.

  321. Anonymous (verified owner) –

  322. Anonymous (verified owner) –

  323. Randal Langley (verified owner) –

    Placed order (#044051) on 2/4/22. Still have not received product or any shipping info.

  324. Danny Jelinek (verified owner) –

  325. Michael A. (verified owner) –

  326. Anthony C. (verified owner) –

    Easy installation and +2 rounds in my previously 10 round mags. Mags work perfectly slow fire and rapid fire. Slide locks back on empty mag.
    I highly recommend this product

  327. Nathaniel Schaffer (verified owner) –

  328. Tim Waldroup (verified owner) –

    Quality components. Easy installation.

  329. Garrett P. (verified owner) –

    Only a few hundred rounds through it so far, but absolutely no malfunctions, easy to install and fits great. If I didn’t know better I’d say the thing was magic. Between my experience and other trusted reviews, I’m completely comfortable using this in my EDC.

  330. Anonymous (verified owner) –

    Very satisfied and impressed.

  331. Scott Sullivan (verified owner) –

    These are really freaking expensive but they work. Good things cost money and any edge you can add to a carry gun is worth it. But guys, please don’t raise the price, I mean good grief, these cost a lot of money.

  332. Jerod (verified owner) –

    Only shot 150 rounds through the mags but so far they’ve worked flawlessly. I will be buying more after I put some more rounds through them to make sure they continue to function properly. I’ve made two orders and both came very quickly.

  333. Tim Waldroup (verified owner) –

  334. Ari L. (verified owner) –

    These kick asssssss, better than oem and got rid of the sig not staying open after last shot issue . Thank you so much

  335. Anonymous (verified owner) –

    Works great! Turns my p365 into what the XL would hold just by installing the MagGuts +2. Very pleased with this product. Can’t wait for them to come out with one for my Smith and Wesson csx!!

  336. Steve J. (verified owner) –

    I haven’t gotten out to the range yet but installation was a snap and I have cycled the slide and all rounds fed like they should!

  337. Ashley R. (verified owner) –

    Works flawlessly a must have for your p365 mags I have one in my 12 round and 10 round nothing like carrying 15 rounds a tiny gun or 13 in a almost flush mag highly recommended I’ve ran over 500 rounds thru them with no problems

  338. David L. (verified owner) –

    Shipping was very quick. Installation was a snap and it appears to be a quality product. I have not had a chance to function test it yet but I have no concerns.

  339. Kevin W. (verified owner) –

    Easy to install.

  340. Ronald (verified owner) –

    Almost as much firepower as I had in a G19! Having 13 rounds in a pistol that fits in a pocket is a game changer. So far, I’ve only fired about 200 rounds and hand cycled close to 1000–not a single malfunction. I should have bought Magguts a long time ago!

  341. PHILLIP C. (verified owner) –

    Easy to install and works great! Fast shipping too!

  342. Marc Tiamzon (verified owner) –

    Fit and finish is flawless.

  343. Carl (verified owner) –

    Does exactly what it says – somehow fits 12 rounds despite being shorter than the OEM 10 rounder with a pinky extension. The only issue is that the rear bottom corners are very sharp against your palm, but they’re easy enough to file down.

  344. David Hedstrom (verified owner) –

    Still waiting for my order didn’t receive it yet

  345. Todd Thayer (verified owner) –

    Awesome!

  346. Donald W. (verified owner) –

    Assy easy function perfect

  347. Billy Turner (verified owner) –

    PERFECT!! In Every Way!! Added 2 rounds to the stock mag without adding length. Dry feeding was Perfect, Live Fire was Perfect. Installing was quick and easy. It gets No Better!!

  348. Scott H. (verified owner) –

    I ordered what I thought was the +2 for the 365X but actually was for the regular 365. I reached out to them and he said just send it back and he would replace. Just got my replacement as promised. Great service and a great product. Highly recommend them!

  349. Billy Farmer (verified owner) –

    When I finally got to the range to use the MagGuts for my four magazines in my Wilson Combat Sig P365 they fed like a dream. The range-master also shoots the Sig P365 and he is now interested in MagGuts.

  350. Noah (verified owner) –

    Very convenient way to get a few extra rounds. It’s roughly the same size as the factory 10rd with the pinky extension, but more comfortable and better capacity. Would recommend.

  351. Adam F. (verified owner) –

  352. DANNY L. (verified owner) –

    The Follower has a front cant that is close to tilting out, returned at my expense with no problem. All correspondence is done by email no live help.

    • admincorso (store manager) –

      The MagGuts follower appears to fit a little differently than the factory Sig follower. This is normal. Ours is a patent pending design that has no front skirt (but instead an attached flat spring) and is part of the reason we can get 2 rounds more in the mag than the factory does. It cannot come out of the top of the magazine and works perfectly. Looks different…works great. Our bad for not explaining this well enough to overcome your perception.

  353. JAVIER (verified owner) –

    Great product, I am very happy with my purchase. I will keep buying more

  354. BARRY (verified owner) –

    I have bought MagGuts magazine insides for a while now. This is my third or fourth order, and I have never been disappointed. The product works right out of the box, and never disappoints. It is a reliable way to increase magazine capacity and who doesn’t like more! (unless it’s taxes.)

  355. James Wilkins (verified owner) –

  356. Hardy C. (verified owner) –

    Works perfectly, and I love that it doesn’t add any length to the magazine!

  357. Robert Boyle (verified owner) –

  358. Jose H. (verified owner) –

    🙂

  359. Thomas (verified owner) –

    Well made, reliable and shipping was quick.

  360. Paul B. (verified owner) –

    So far everything is great! Works as described. Easy installation, fast shipping etc. Time will tell if this holds up and can be counted on reliably for EDC. So far I’ve put about 400 Blazer FMJ 9m range rounds thru with 115g and 124g — no issues at all. Very pleased … so far. Contact me in about a year to do a reliability feedback form.
    PS: Website could use some work. Need feedback on orders, cost, shipped status etc. etc.

  361. Don F. (verified owner) –

    What more can I say that already has been said before. It improves the OEM magazine by 100%. I can now load 12 rounds by hand where before I needed to use a Maglula loader to completely load the 10 round magazine. Also it is much easier to seat the full magazine in the gun now. Oh, the gun functions 100% with several different brands of bullets.

  362. Asa F. (verified owner) –

    It works well, just as advertised. Came in the mail quickly.

  363. Ronald R. (verified owner) –

  364. Anonymous (verified owner) –

    just AWESOME! takes the pistol to a new level

  365. Michael (verified owner) –

    Went together easily enough and holds 2 more rounds. I haven’t had a chance to test them at the range though.

  366. Christian P. (verified owner) –

    Slide doesn’t lock back on last round

  367. Patrick McCann (verified owner) –

    After assembly the follower looks like it’s about to pop out of the magazine body. Not a good first impression.

  368. Josh (verified owner) –

    These work perfect thank you

  369. Sean (verified owner) –

    I was amazed how tight the OEM magazines are for the Sig P365. I couldn’t load the last round at all. Some folks have said on YouTube and other places it’s because some of us are weak. That’s patently not true. These mags from the factory need a lot of break in time. Too much honestly.

    I researched these MagGuts springs and innards quite a bit. Yes, a few folks had issues and yes, the floor plate still has points that need sanded off (MagGuts folks, you listening?) but overall, it really works. The extra rounds for me are a bonus, not the reason I purchased a set. I can now load not only the original 10 rds of 9mm by hand in the OEM 10 Rd magazine, but all 12!

    Fix the pointy floor plate issue folks. That’s my one and only complaint about these. So far, well worth it.

  370. gerrit p. (verified owner) –

    Great product, easy to install and really adds two additional rounds to my 10 round magazine. The original magazine actually has a deficient spring that caused malfunctions when loading to 10, the max was always 9 rounds to reliably cycle. Now with the Magguts spring it reliably cycles 12 rounds.

  371. Frank Rollberg (verified owner) –

    Very nice!!

  372. John P. (verified owner) –

    Easy installation and I like the fact that the spring doesn’t rattle like the factory one did. Took it to the range and emptied it 5 times with zero issues.

  373. Anonymous (verified owner) –

  374. DALE STROUD (verified owner) –

    I don’t know why Sig does not cooperate with your company to coordinate their ability to distribute their firearms with your technology!

  375. JAMES B. (verified owner) –

    Fantastic mod! Love it

  376. Wolf J. (verified owner) –

    Excellent product and fast shipping.

  377. Dennis (verified owner) –

    Makes my sig 365 10 into a 12 still with the short handle. 14 in a 12. Still looks like a 10 from the outside of the mag. Still looks legal.
    A bit stiff loading by hand, at least the first time loading it.

  378. SILFREDO (verified owner) –

    Great Product and works as advertised.

  379. David Lopez (verified owner) –

  380. Michael Muratore (verified owner) –

    I like the added capacity but do not like it does not fit the original base plates of the sig and do not like the base plates that come with the kit .. I had the baseplate extension factory sig and they don’t work anylonger .. so I’m not sure I’m going to keep magguts kit

  381. Michael D. (verified owner) –

    Amazing. Works great!

  382. Rick T. (verified owner) –

    Great system. Was easy to install. No issues.

  383. JAVIER G. (verified owner) –

    Very awesome product, I bought two and I am very happy, no failures so far, just like OEM.

  384. Mel Roberts (verified owner) –

    Super fast delivery and only 1 trip to range so far , works perfect

  385. Brian L. (verified owner) –

  386. Anonymous (verified owner) –

    These are great! cycles fine factory ejection pattern retained.

  387. Charlene Fyda (verified owner) –

  388. terry moore (verified owner) –

    After testing the first one, just had to get another one.

  389. Red Mendoza (verified owner) –

  390. Steven H. (verified owner) –

    Awesome product, will be buying many more. Last round loads much easier than with original spring/ internals. Zero issues feeding and locking slide on last round. Extention plate has good purchase, yet smaller that OE pinky extention and it’s easy to custom stiple. I trust it on my EDC.

  391. Frank (verified owner) –

  392. Robert Crowley (verified owner) –

    I wish I could have scored this a 4.9 because it’s almost perfect. Other than the the rear corner of the magazine pokes your palm while shooting. A minute or 2 with some sandpaper and now it’s perfect. Other than this tiny issue this product is amazing.

  393. Anonymous (verified owner) –

    I paid for 2 day delivery and received it a week later. Other than that, the product seems ok. Haven’t put to use it yet.

  394. John S. (verified owner) –

  395. David P. (verified owner) –

    They work great no malfunction at all with hundreds of rounds fired through the magazines

  396. Anonymous (verified owner) –

    Easy to install, so far has performed flawlessly

  397. Anonymous (verified owner) –

    Baseplate has rough edges and corners that bite the palm. They smooth easily enough with a razor knife but the fit and finish could be better.
    Otherwise it works completely as advertised.

  398. Joe B. (verified owner) –

    Using Magguts in 3 pistols now and never a hic-cup. Looking forward for MagGuts to make a +2 for the Glock43X.

  399. Damien (verified owner) –

  400. Jeremiah Wright (verified owner) –

    This is amazing technology. Please make one for the 15 rnd P365xl!

  401. Jim M. (verified owner) –

    Great product and does what’s expected.

  402. Octavio (verified owner) –

    Adds two rounds, feed properly, lock slide back and very well mad. works as advertised.
    On the 10 plus 2 only down fall is the back edges of the base plate is really sharp corners. Quick fix get a file and round off the corners.

  403. Daniel W. (verified owner) –

    Ran a hard 100rds using Speer ball ammo and also Winchester (white box…meh rounds) through each mag after switching the original Sig springs with yours and had no failures. I am very pleased with your product.

  404. Anonymous (verified owner) –

    Shipped fast.

  405. Daniel Holum (verified owner) –

    Easy to install, same size as a 10 round mag with grip extension.

  406. Dylan (verified owner) –

    Installation had moments of uncertainty. But overall a great product. If your getting a tactical develop pro ledge make sure you get the special one for the magguts, I learned the hard way. Maggutz are solid. Will purchase more.

  407. Nathan (verified owner) –

    Super easy install and definently made mags easier to load. Only 100 or so rounds through it but so far it has functioned flawlessly.

  408. Richard B. (verified owner) –

    Feeds great

  409. Ryan D. (verified owner) –

    Boom. These are better than the OEM 12 round Mag. The 12 round OEM Mag does NOT allow the 12th round due to a problem in manufacturing. But, the 14 round Magguts fixes that problem. This 12 round went into my 10 mag and now I wonder why it took me so long. Wish you had these for all my firearms.

  410. Vic Boyer (verified owner) –

    Same comment that I made on the Smith Smith 9 mm plus.

  411. Anonymous (verified owner) –

  412. John B. (verified owner) –

    I bought a couple of these for my Shield 9 a couple years ago and they worked great so I bought one for my P365 and it works great, I will be buying more for my 12 round mags, Great products

  413. Anonymous (verified owner) –

    Fantastic quality and function!

  414. Marcel G. (verified owner) –

    These are a great alternative if you want to keep the low profile of the 10 round mag. Plus they’re easier to load than oem.

  415. Anonymous (verified owner) –

    Excellent product and fast shipping as always. I have these in all of my P365 mags (something over 20). Additional ammo is always desired in a carry gun, and these provide that along with confidence that they will work. I’ve been using MagGuts in several different models of guns for years and they’ve always been flawless – and in some cases even improved the reliability over factory internals (I’m looking at you, Kahr).
    Note that these springs have an additional “coil” over previous versions – I initially thought that the 12-to-14-round springs had been mistakenly put in the box, but saw where those had also grown another “coil.”

  416. James Vella (verified owner) –

  417. Anonymous (verified owner) –

  418. James (verified owner) –

    Excellent magazine!

  419. BARRY B. (verified owner) –

    I have bought magguts conversion kits for all of my Automatic pistols. They work BETTER than the OEM magazines. And get the benefit of having more rounds

  420. Mark M. (verified owner) –

    Easy to install

  421. David N. (verified owner) –

    Does what it says, easy Install, very pleased, will buy additional for 365

  422. ramon (verified owner) –

    Awesome product even reduces the difficulty of the stock spring on my sig p365 getting more now

  423. RICHARD K. (verified owner) –

    WAS TO INSTALL, SO FAR THE 10+2 & THE 12+2 WORKED PERFECT THRU 100 ROUNDS 124 GR FMJ.,

  424. Brock S. (verified owner) –

    I bought 2 magazines and put 10 mags worth of ammo thru each with no issues. I recommend these to my friends!

  425. Anonymous (verified owner) –

    Worked flawlessly so far.

  426. Terry (verified owner) –

    This thing works great and it doesn’t extend even as far as the stock pinky extend magazine. I’ll probably use as back up mag until I have tested it more. But after 200 rounds of target ammo, so far no hang-up at all. Congrats to the engineers. Thanks

  427. Paul L. (verified owner) –

    Install took about a minute. No issues with sharp edges even when carrying against the skin. Have put a few hundred rounds through it thus far with no failures. Had no grip issues even when sweating heavily. This product performs as advertised.

  428. David (verified owner) –

    I have the highest regard for your “guts” but this time i screwed up, ordered wrong stuff had to send back waiting for replacement. Anyway mags i have put these in have NEVER failed to feed!! Bravo folks Bravo!!

  429. leroy sprey (verified owner) –

    No matter what I did and I enlarged the hole in one of my pinky extensions the base pad would not lock in. I have sent them back for a refund I bought a set of Armory Craft base pads that match my Wilson Combat grip module and they won’t secure. Really disappointed

    • admincorso (store manager) –

      These P365 conversions require the use of MagGuts bases. The bases are part of the system along with the spring and follower that allows +2 with almost no size increase.

  430. Valerio H. (verified owner) –

    Delivery was faster of what I anticipated. Very simple to assemble. Function and resistance feels the same as the original spring. Loading the magazine doesn’t feel any different from loading with the original spring (although they are 2 extra rounds). Went immediately to the range and ran 200 rounds through that mag flawlessly. Will keep using it at the range until convinced 110 %. At that point will start carrying it in the gun and will purchase another one ( for the 15 rds mag). I call it the “magic spring” and love this invention!

  431. Brandon C. (verified owner) –

    Took the standard 10 round mag and added 2 rounds! Amazing that they are able to accomplish this! Quality of the product is great. Time to order a couple more for all of my compatible guns

  432. SETH (verified owner) –

  433. William M. (verified owner) –

    Easy install, works great.

  434. Michael S. (verified owner) –

    Easy to install. Slight sharp edge at base that was quickly fixed with a little sanding.

  435. Irwin Black (verified owner) –

  436. Anonymous (verified owner) –

  437. Larry K. (verified owner) –

    Quality product, easy to install, works like a charm

  438. Joseph (verified owner) –

    Easy installation. Works great.

  439. Brad B. (verified owner) –

    Fast and Easy install. 100 rounds through it with no issues. +2 with in the micro frame is a miracle. FAST shipping, user-friendly website, detailed description of the products.

  440. RANDY TAN (verified owner) –

    I ordered the wrong conversion and MagGuts customer service did a great job changing my order over the weekend. Much appreciated and thanks!

  441. Christoph (verified owner) –

    Last round always get stuck in the mag while the slide already locks b@ck as if on empty – no support email to get help

  442. Jared R. (verified owner) –

    Easier to install than the 12rd and 14rd versions. Expensive.

  443. Christopher (verified owner) –

    Works 100% so far. Easy swap. Shipping was fast and very cheap. I like the little bit more grip on the floor plate. Not much but just enough. I’ll be buying more.

  444. Anonymous (verified owner) –

    Great product 👍🏼. I bought the 12 round conversion for a 10 round P365 magazine. Works great and was an easy install. It was shipped fast with great comms too. 😊

  445. Keith (verified owner) –

    After struggling for 30 minutes to get the spring in and baseplate on I discovered the baseplate will not lock in place no matter which way I put the spring in. In addition, the poor fit of the follower leaves me doubting the reliability of the magazine with these internals. I only use OEM Sig Sauer magazines. I feel that I have wasted my money on these and will not buy any further magazine internals of this type.

  446. Cory F. (verified owner) –

  447. Joshua (verified owner) –

  448. Sherman Nowlin (verified owner) –

    Excellent product as usual

  449. Anonymous (verified owner) –

    Love it. Works perfectly and is reliable

  450. Larry Bernard (verified owner) –

  451. Anonymous (verified owner) –

    Bought these for extra rounds in my wife’s EDC. Works as expected with no issues.

  452. BRETT (verified owner) –

    Works as advertised! Easy to install and easy to load. Will definitely buy again.

  453. Brian A. (verified owner) –

    Works as advertised. Practiced with target ammo and my carry ammo with no jams. It adds basically no length to the grip which is great for concealment. Would recommend for my fellow sig friends!

  454. Kenneth Thie (verified owner) –

    Fast service. Great quality.

  455. TERRY (verified owner) –

    Great price and product. Fast shipping.

  456. Hugh (verified owner) –

    I have always had good experiences with MagGuts very happy to recommend them. They ship fast too!

  457. Bobby (verified owner) –

    Easy installation. Great product so I purchased another one.

  458. TERRY LABBE (verified owner) –

    Great fit, excellent quality. Fast shipping. Highly recommend.

  459. Anonymous (verified owner) –

    Works great. 12 +1 in a small carry gun is about as good as it gets.

  460. Anonymous (verified owner) –

    No issues with cycling and works great

  461. Omar A. (verified owner) –

    Love it.

  462. David (verified owner) –

  463. James (verified owner) –

    Fit great and work as expected.

  464. Kevin (verified owner) –

    Easy to assemble. Works good.

  465. Blake S. (verified owner) –

  466. Stanley C. (verified owner) –

    The shipping was very fast. I received my order in one day. Installation was quick and easy. I’ve only had an opportunity to run a few magazines through the pistol so far. Loading the magazines to full capacity was easier than with the OEM parts. So far function has been flawless. The slide locks to the rear when empty.

  467. Anonymous (verified owner) –

    Easy install and they work!

  468. Anonymous (verified owner) –

  469. Craig L. (verified owner) –

    It’s very easy to install. Adding 2 more rounds; impressive.

  470. Anonymous (verified owner) –

    Looks great. Haven’t shot it yet. I will soon try it out.

  471. Michael Slizewski (verified owner) –

  472. Anonymous (verified owner) –

    Excellent product expanding capacity to allow me to add rounds to an existing magazine. Took it to the range and ran a 4-5 mags of rounds through it to make sure it fed correctly before using it in my EDC firearm. Target and Sig HP and Spear HP rounds fed just fine.

  473. Darin (verified owner) –

    They fit the extra 2 rounds and are reliable, in my experience. I have 5 total kits for p365 and 365xl. 2 365, 10 to 12 rounds, 2 365 12-14 round and a 365xl 12-14. I’ve had zero malfunctions with any of them. I’m still a little hesitant to use them for carry, but getting closer by the day.

  474. Erik S. (verified owner) –

    Expensive, but easy install. Hand to sand corners of base plate to make comfortable.

  475. Lawrence (verified owner) –

    Better than expected! Very happy , ordered second one.

  476. Robert T. (verified owner) –

    Great product and support!

  477. Rodney (verified owner) –

    I like it after correct installation

  478. David (verified owner) –

    Have installed and it did add 2 rounds to the capacity of the magazine. Installation was easy. Haven’t shot yet.

  479. Dan (verified owner) –

    Installation was a breeze. I haven’t shot yet but I can’t see why it wouldn’t operate effectively. I recommend purchasing it for all your mags.

  480. Anonymous (verified owner) –

    I’m giving a 3 as I haven’t had a chance to live fire the new springs since I just got them and was sent t I is link to review but it appears to function fine while handling the pistol. Size is awesome and a nail file to the corners as everyone else said.

  481. Anonymous (verified owner) –

    Fast shipping, works as advertised!

  482. Miguel A G. (verified owner) –

    As described, arrived promptly.

  483. Thomas (verified owner) –

  484. Paul (verified owner) –

    Excellent upgrade and functions perfectly. 13rds in a P365 is a nice cushion. Magguts…..offer discounts! Do that and I’ll upgrade every Sig mag I have! Also, when are we getting a 2rd upgrade for the P365 Macro??

  485. Anonymous (verified owner) –

    great item, functions well, delivered quickly!

  486. Ronald B. (verified owner) –

    I bought this kit for my daughter. However, she liked my P365XL mag, with the Magguts better. 14 is always better than 12. And, although being a lady of small stature, she liked the longer grip. So, I guess that Dad will buy a couple more. Btw, the function has been perfect. No double feeds. No hang ups at all, and last round hold open, is 100%.

  487. William N. (verified owner) –

    Still waiting for delivery

  488. robert w. (verified owner) –

    I kept having issues fully loading my 10rd magazine. Not only did this fix that problem but gave me two extra rounds. Win, win for me. Extremely simple to install as well. I’ll be purchasing one for my 12rd magazine soon.

  489. Ryan (verified owner) –

    Installed very easy and functions well. I would’ve given 5 stars, but there is no texture on the polymer base and there are extremely sharp corners at the rear of the baseplate that digs into my palm. I had to file these points down. At $34 each, these kits are as expensive as a new factory magazine. I really expected perfection for that price.

  490. David Morales (verified owner) –

    Wish I could upload a video of all three! The 10 to 12. The 12 to 14, and the 15 to 17! All with a round in chamber making them: 13, 15 and 18! All fired FLAWLESS! Thank YOU!!!

  491. David Morales (verified owner) –

    Wish I could upload a video of all three! The 10 to 12. The 12 to 14, and the 15 to 17! All with a round in chamber making them: 13, 15 and 18! All fired FLAWLESS! Thank YOU!!!

  492. Jorge F. (verified owner) –

    Bought 2 of these for both 10 rnd mags that came with my puny little 365. After figuring out the direction of the oddball spring and how it goes into the magazine it clicked into place and I immediately tested the new capacity. 12 went in, Excellent! Also purchased the 12 round +2. Head to the range and got fantastic results. The 2 10 round, now 12, had zero issues. Not a single FTF or FTL. Perfect. I’m sure I can count on Magguts when it counts.

  493. Michael K. (verified owner) –

  494. Enrique Valdez (verified owner) –

    Very Easy to install! My mags ran flawlessly two thumbs up!!!

  495. Kevin G. (verified owner) –

    Super fast shipping speed! Easily installed product, and works just as good if not smoother than OEM

  496. Steven (verified owner) –

    Good product. Does what it says for less than purchasing the 12 round magazines. Feeds well in my P365 SAS. As others have pointed out the corners are sharp and uncomfortable (thus 4 stars and not 5). 4 stars instead of 3 because it is very easy to fix with a little sandpaper.

  497. Steve N. (verified owner) –

  498. Robert Near (verified owner) –

    Good price shipped quickly works perfect

  499. Michael N. (verified owner) –

  500. Theron Patron (verified owner) –

    I have purchased your product for my Kahr cw380 and SIG P365 I’ve taken my weapons out to the range. I’ve run them very hard and no hiccups. I am very pleased with your product

  501. Luis Santiago (verified owner) –

    If I could give it a 10 I would!!

  502. John P. (verified owner) –

    Worked great. Can’t wait to get them for my Kahr P380

  503. Norm (verified owner) –

    This is a must have product for a Sig P365. Now that little gun will hold 13 with one in the chamber. Easy to install and flawless function what could be better.

  504. Gary B. (verified owner) –

  505. Lionel W. (verified owner) –

    Product works as advertised. Will purchase more.

  506. Ted G. (verified owner) –

    Installed quickly. Appears to be a solid choice to extend the magazine capacity from 10 to 12 rounds in a standard P365 magazine.

  507. PAUL (verified owner) –

  508. Anonymous (verified owner) –

  509. Michael M. (verified owner) –

    Got my order right away but still waiting on Kahr +1 availability.

  510. Brian L. (verified owner) –

    Easy install. So far no issues

  511. Connor (verified owner) –

    I have a Sig P365 with 10rd mags I’ve put 300 rounds through two mags and no issues yet. Really cool how they’re able to stuff 2 extra rounds into an already very small magazine. Guys with a lot more gun experience than I are even baffled by it. The only disappointing thing is that once the guts are in there, you can’t add a pinky extender.

  512. Anonymous (verified owner) –

    Great product, better than stock. The only problem would be the sharp edges on the back. I had to sand those down. Perfect otherwise.

  513. Anonymous (verified owner) –

    Works Flawlessly, Customer Service was a great help when I ordered the the wrong item and got it corrected right away!

  514. Anonymous (verified owner) –

  515. Anonymous (verified owner) –

  516. Questen A. (verified owner) –

    Very easy install. Love the red reciever and the little tab on it that makes it easier to verify an empty mag and load that first bullet.

  517. Mark (verified owner) –

  518. Edward G. (verified owner) –

  519. Michael A. (verified owner) –

    Not my 1st time purchasing, I got 12+2 & 10+2 about 2 years ago, maybe longer. 10+2 I used mostly until spring compacted or something, it’s shorter than the new one. Old 1 started jamming. Until then it worked great, 12+2 still working great but then again I don’t leave it loaded unless at the range.

  520. Gerald W. (verified owner) –

    Worth every penny! I had a little difficulty putting everything together but in the end, it came out great!

  521. Kyle A. (verified owner) –

    These are a must have fix for Sig’s shoddy magazines. Feeds more smoothly and holds more rounds… whats not to like? I wish i didnt need to buy these but my poor p365 deserved better.

  522. Anonymous (verified owner) –

    Great product, arrived in good time

  523. Jeffery Jones (verified owner) –

    Works like you said it would. I’m good.

  524. Sean Danielsen (verified owner) –

    Your products are the best, and I have several different mag kits at this point.
    I only wish you made kits for more guns…… I will always put your kits into any guns I have that you make a product for

  525. Anonymous (verified owner) –

    Great product, I would like a medium extended base plate for the Sig 365 since this is a small handgun but very well engineered product!

  526. Jadyn R. (verified owner) –

    Works exactly as advertised, I would happily recommend these kits for anyone who owns a Sig p365

  527. Anonymous (verified owner) –

  528. Ronald N. (verified owner) –

    Excellent product and tremendous value. Highly recommend.

  529. William B. (verified owner) –

    I would like the pinky extention to be the same as the one that came stock.

  530. Robert J. (verified owner) –

    Fast shipping, good communication, and good instructions. And they work. An amazing upgrade to an already amazing pistol.

  531. Curtis L. (verified owner) –

    Easy to install and works as advertised. What’s not to like?

  532. Anonymous (verified owner) –

    Easy installation, easy to load, functioned flawlessly through its first 200 rounds

  533. Duane (verified owner) –

  534. Tim Nypower (verified owner) –

    These are crap, the design of this chunky square baseplate doesn’t flow with the lines of grip of the gun creating a nasty sharp edge. Deep red grooves in palm after firing a single mag. These need to be retooled to fit the handgrip with tighter tolerances and better transitions from grip to mag. Need a v2.

  535. James D. (verified owner) –

    I had a bit of a time getting them in right but they are awesome i am 100 % glad i bought them.

  536. Thomas F. (verified owner) –

  537. David Cleveland (verified owner) –

    Easy to assemble. Fits the extra 2 rounds

  538. Orlando Gonzalez (verified owner) –

    awsome company

  539. Jonathan K. (verified owner) –

    Simple to install, fits two extra rounds as advertised. Haven’t had a chance to shoot with it yet. AND it gets rid of the rattle!

  540. Anonymous (verified owner) –

    Works as advertised, no jams, weapon always locks open when empty. Easier to load mag than original sig mag.

  541. Dr Don H. (verified owner) –

    Well designed and fits like advertised.

  542. Robert N. (verified owner) –

    It’s absolutely necessary for these Sig mags, feeds and loads so smooth!

  543. Edmond F. (verified owner) –

    Went together easily and had no problems stuffing the extra two rounds in it. Haven’t shot it yet, but the tension feels right and I don’t think I’ll have a problem with it at the range.

  544. Jimmy J. (verified owner) –

    Both kits were easy to install and worked perfectly as advertised. Will likely buy more kits to convert my other msgs.

  545. Jack Z. (verified owner) –

    Possibly a little over-priced for what it is, but what it is is perfect. Easy install, feeds/works perfectly. Except for the slight visual differences (baseplate a couple mm thicker, black in my case, I had coyote tan, and a red follower) you’d never know it was modified. Great product.

  546. Carlito V. (verified owner) –

    Quick delivery, installed easy and works great.

  547. Michael G. (verified owner) –

    have used MagGuts for many years and multiple guns, very pleased with the products.

  548. JOSHUA M. (verified owner) –

    Great product, high quality, simple to install! Shipped morning after I ordered, arrived day after that.

  549. Anonymous (verified owner) –

    Fully reliable for 600+ rounds so far

  550. Joseph B. (verified owner) –

    Easy install and reliability and feeding are like stock springs. Highly recommend for p365 owners!

  551. Theron Patron (verified owner) –

    One extra round might mean your ass in a bad situation when you get selected to be a victim. One thing that this product allows you to do is. Get a couple of extra rounds and still maintain a low profile on your magazine. Extended magazines when you bending over. Tend to poke out and let someone know that you have a firearm.

  552. Theron Patron (verified owner) –

    I like this kit.

  553. Anonymous (verified owner) –

    great product

  554. Matthew (verified owner) –

    Purchased 2 for carry – 10 and 12 round versions for SIG 365. Quality product, easier to load, easier to get that last round in and so far, flawless. An extra 2 rounds makes a material difference without impacting concealment or reliability. Highly recommend and purchased additional units for all my mags.

  555. Jeremy M. (verified owner) –

    Fast shipping! Priced great! Will be buying more.

  556. Jarad K. (verified owner) –

    Product done the job. Still deciding if it’s worth the price. In the end I now basically have a 100 dollar magazine. But I like having a 12 round magazine in a small package.

  557. Victor A. (verified owner) –

    Worked as it should

  558. Brandon (verified owner) –

    Thanks to some commentors that recommended a nail file to slightly round off the back corners. Same capacity now as my XL in the smaller package.

  559. Nicolas Wilbanks (verified owner) –

  560. Samuel Walton (verified owner) –

    I’m a mechanical drafter by trade. One of the basic rules of design is if whatever you are making is going to be handled by someone, it’s courteous to put a round or fillet on all sharp edges. Love mag guts but the baseplate needed 10 minutes worth of sanding for a comfortable grip and comfortable carry as the sharp edges can be unpleasant. Hoping this review catches their design teams attention as such a simple fix to the molding would improve the design a lot. Otherwise a flawless design and fantastic upgrade. The baseplate is a little smaller than the pinky extension and a little bigger than the flush baseplate. It ends up being about 3/8″ give or take shorter than a factory Sig 12 round magazine. Simply amazing.

  561. James Cannon jr (verified owner) –

    Easy swap works vreat

  562. nicholas (verified owner) –

    Well done!

  563. Michael Sabaski (verified owner) –

    Maybe I’m doing something wrong but it doesn’t seem to work. The loading piece will not stay in place no matter what I tried. Would definitely not recommend.

  564. David (verified owner) –

  565. Anonymous (verified owner) –

    Only slightly disappointed that it was not flush fit.

  566. Nicholas (verified owner) –

    Awesome customer service!
    I mistakenly didn’t fill out my address correctly, was contacted and taken care of quickly!

    Thank you!

  567. Trenton w. (verified owner) –

    Works great. Zero malfunctions so far. Except for inertia charging doesn’t work unless the mag is full.

  568. Verified Buyer (verified owner) –

    Worked perfectly

  569. Joey Whaley (verified owner) –

  570. Verified Buyer (verified owner) –

    Works great. Love the extra 2 round on my P365

  571. Bill Kline (verified owner) –

    Very easy install. I ended up replacing all my Sig P3665 mags (5) hope these are as reliable as the reviews state

  572. Verified Buyer (verified owner) –

  573. Verified Buyer (verified owner) –

    I highly recommend this company and their products! An awesome way to increase capacity in already compact sizes.

  574. Verified Buyer (verified owner) –

    I have these springs for both the 10rd mag and 12rd mag. Absolutely love them so much I bought an extra one for my spare 10rd. If you’re wondering about longevity for these springs I can honestly confirm they will outlast the factory mag body. I originally bought the mag springs back in march of 2021 and some 8500 rounds later between the two mags the springs are going strong but one mag body broke and the other has a crack in the same area. So the one mag spring is in its second mag body and once the other mag body breaks I’ll put it in a new one.

  575. James Tuttle (verified owner) –

    These are amazing! Will definitely buy more

  576. Eduardo Martinez (verified owner) –

    Quedo magnífico , fácil montura y quedo Perfecto, muy recomendable, ahora la pistola tiene más capacidad con l misma conveniencia de tamaño

  577. Justin C. (verified owner) –

    Kind of a pain to install, but they add +2 with no additional length or width to the mag.

  578. Anonymous (verified owner) –

    The corners of the bottom part are a little pointy. I will be rounding those over but overall a great product.

  579. Erik P. (verified owner) –

    Very happy product is reliable and as described

  580. David (verified owner) –

    This is the second Mag Guts kit I’ve bought recently, one for my Glock 43 and one for the Sig 365. Both went in fairly easily and seem to function as intended. I have fired two magazines through both with no issues and the 365 mag is SO much easier to load with the +2 Mag Guts kit. I did have to file the rear corners off of the supplied 365 baseplate as they are very sharp and uncomfortable to grip and fire. I now have 8+1 in the Glock 43 and 12+1 in the Sig P365. My favorite guns are just a little “more favorite” now. Just don’ t be in a hurry as the shipping on mine was a little slow.

  581. Anthony C. (verified owner) –

    A bit of an interesting installation process for both the normal mag and the xl mag, but once you get a few tries in, it’s much faster.
    The normal 10 Rd mag and the 12 Rd mag both fit in the Mischief Machine commander grips (365 and 365xl)
    The one thing it’s weird is that the springs shake without ammo and with ammo. Good thing is that you don’t hear the noice while carrying concealed.

  582. Kevin H. (verified owner) –

    Excellent products from MagGuts. I initially ordered two kits for my twelve round mags, liked them so much I ordered two for my ten round clips. Easy install, works great. They had the fastest shipping I’ve ever seen…both kits arrived a day early. Would highly recommend MagGuts.

  583. john b. (verified owner) –

    I was skeptical that this modification to my mags would work. The modification was easy and the mags work perfectly at the range. I put 100s of 9mm rounds through with no problems.

  584. zach c. (verified owner) –

    These are FANTASTIC! I mean, who wouldn’t want 2 more rounds, easier loading, and flawless performance?

  585. ORLANDO GONZALEZ (verified owner) –

    GREAT PRODUCT

  586. Anonymous (verified owner) –

    Awesome

  587. Anonymous (verified owner) –

  588. Jonathan Phillips (verified owner) –

    I love these. I have two for my 365x mags also. I only have one suggestion. Like many people I run wilson combat grips on my 365 and x. I use the matching WC pinky extension on the 10rnd mags. I have trouble with even the small oem extension on 10 rnd mags. I wish Magguts made a base plate for the regular p365 mag upgrade that provided a descent pinky ledge. A wilson combat plate that would fit magguts 10+2 would be awesome. Still waiting for you all to come up with a +2 or 3 for oem 17rnd mags?? Thanks guys. Great work. They always feed, no matter how long they lay around loaded. I’m super happy with them. Thanks again.

Only logged in customers who have purchased this product may leave a review.

Related products

Copyright © 2024 MagGuts. All rights reserved.