Smith & Wesson BG380 MagGuts

CVN023
(182 customer reviews)

$22.95

Smith & Wesson BG380 MagGuts™-High Capacity Magazine Conversion
Converts your 6 round S&W Bodyguard .380 caliber magazine into a 7 round magazine without extension. The kit uses your existing magazine tube and base plate while replacing all internal components with the MagGuts™ hybrid spring system. This updated version of the product contains a spring system that is attached along with the lock plate as one piece for easier and more foolproof installation. You also get a little more spring force for positive slide lock and feed.

-Easy to install.
-Maintains slide lock and feed reliability.
-Finger extension and flat base plates are both compatible with this conversion.
-Patented
-Compatible with original S&W magazines only.

THIS ITEM IS CURRENTLY OUT OF STOCK.

Out of stock

SKU: CVN023 Category:

182 reviews for Smith & Wesson BG380 MagGuts

  1. Connor G. (verified owner)

    Worked great as always. I have a kit in my Bodyguard and a few in my Shield.

  2. Jonathan K. (verified owner)

    Excellent product. Well designed and very well made. Instructions were the only downside. Difficult to follow and poorly worded. Videos did help a lot, but shouldn’t be necessary.

  3. George E. (verified owner)

    I returned the MagGuts RMA # 1434 on Sept 2, 2017 and still have not received my refund. Thought maybe Hurricane Irma got it.

  4. Dan S. (verified owner)

    I purchased a SW .380 Bodyguard and Immediately started looking for an option to add an extra round or two without taking away the concelability that I bought the gun for. I found mag guts and thought I would give them a try. I could not be more impressed with the quality of materials and ease of installation but the best part is it doesn’t change the profile of the firearm at all. I have fired the pistol several cycles with the new mag guts installed and it has been flawless and have even had a couple of people on the firing line notice that I was getting an extra shot. I told them about the mag guts and they were excited to see if they were made for their firearm too. Thank you for making such a high quality innovative product. Keep up the good work. Dan

  5. David H. (verified owner)

    Great product.

  6. Ray A. (verified owner)

    Very nice way to add one more round in the stock mag. Mag Guts just needs to make more for different types of handguns.

  7. Paul V. (verified owner)

    Last casing fits tight hard to seat, slide won’t lock open after firing last round , got one for my brother , his is the same

  8. Ward B. (verified owner)

    Works well, no feeding issues after about 200 rounds. Occasionally slide hold open doesn’t work, but since I don’t carry a back up mag, it’s no big deal.

  9. Andy J. (verified owner)

    Works great. Now I need to get some for my 9 mm shield.

  10. Arthur I. (verified owner)

    Why not carry an extra round, as long as the system performs well over time. So far, so good, Caution however: assembly errors are easy to make. Plan on testing at the range. Customer support is great.

  11. Jimmy A. (verified owner)

    Great easily to put in

  12. Chris R. (verified owner)

    Took a bit to figure out getting it together but it works great. 7 plus 1 carry now

  13. John M. (verified owner)

    Installed subject MagGuts in two of my EDC BG380 mags. Have had zero failures in approximately 120 rds after keeping the mags fully loaded at all times for the last couple months. Last round slide lock is functioning with no problems. I’ll install on any additional mags that I acquire. Thx.

  14. George r. (verified owner)

    I was skeptical at first just because the factory stuff works and usually you don’t have a problem but you can just tell the quality of this spring and the way everything fits together is even better than the factory Imo

  15. Chuck B. (verified owner)

    Added another round to my Bodyguard 380, works well. Wish they made a +2 version!

  16. Charlie B. (verified owner)

    Good seller good product

  17. Christopher C. (verified owner)

    No feed issue but not the best base plate

  18. Troy W. (verified owner)

    Have 4 kits total. 2 M&P Bodyguard +1’s and 2 M&P Shield +2’s. All working flawlessly. I wholeheartedly recommend these to anyone who want to increase their mag capacity.

  19. Thomas R. (verified owner)

    The parts were great! Everything went together smooth. But when I put the clip in the springs were too tight and there wasn’t enough room for the slide to be able to slide back. It doesn’t have enough room in the clip for the bullet to depress enough for the slide to slide back. I’m sure I didn’t install it wrong. But that’s my only complaint. I’m hoping that after having it full for a few weeks it’ll settle in and the spring will loosen and provide more room in the clip.

  20. Glenn M. (verified owner)

    Fast delivery and easy install. Nice to have that extra round.

  21. Anthony H. (verified owner)

    Product was exactly as described, works.perfectly

  22. Edgar M. (verified owner)

    I was skeptical at first, but after the easy install and taking magazines to the range for some extensive run throughs, I am pleased. Having an extra round available is sure a confidence builder, especially for a 380 caliber. I highly recommend your product.

  23. John M. (verified owner)

    I have used several Mag Guts kits in the past for various pistols and all have worked great but I have zero confidence in the kits for my S&W Bodygaurd 380. I am returning them.

  24. Richard B. (verified owner)

    The instructions are very poor, I had to find someone on Youtube to show how to do it, I can barely fit 6 rounds in the mag, forget about 7…

  25. Harry A. (verified owner)

    Love having 1 extra when I need it.

  26. Andrew W. (verified owner)

    It was easy to install and functioned as intended.

  27. Alexander J. (verified owner)

    Love the concept, but I unfortunately had 3 malfunctions in 85 rounds using 3 types of ammo. 2 fail to feed, 1 fail to eject. cleaned pistol thourghly, will keep product toe future testing

  28. David S.

    I purchased two of these before they changed the follower design. They never worked correctly. I have attempted to get Magguts to send me the new follower to correct the problem but they refuse to help. I even offered to buy the new followers and I was told they wouldn’t sell just the followers. I would suggest not to deal with magguts

  29. David S.

    This is my second review. The first one was deleted. Kit did not work in my BG380. The slide locked back with a round still left in magazine and then didn’t lock on the last round. Magguts won’t send me the new followers to fix my problem.

  30. David H. (verified owner)

    Easy to install, works great, excellent upgrade fpr my Bodyguard 380

  31. Rickey B. (verified owner)

    I wanted to wait until I could shoot my BG with new MagGut mags in it. This is the third set of MagGuts I have purchased ( Glock 42 & 43). This was a little more difficult to install, The instructions were great and as long as you followed those instructions, everything went well, A great addition to my BG, I am very happy with all my MagGuts addition to all my little pocket pistols, THESE PRODUCTS ARE WELL THOUGHTOUT AND WELL MADE, THEY WORK AS ADVERTIZED!

  32. Jason R. (verified owner)

    Does exactly what it says. In a gunbattle every round is crucial and an extra my just be the one that saves my family. Will buy again.

  33. Jeffrey G. (verified owner)

    I was having double feed issues with the factory mags. Installing the Magguts not only gave me an extra round, it cured the double feed issue!

  34. SAL G. (verified owner)

    I am content with the “MAGGATS” instrument. I putted to the test and I am arise with its performance. If I were to purchase more of the “GANGGATS” I would not hesitated to do so. I also would suggested to people that I know.

  35. David S. (verified owner)

    I have the Magguts installed on a Smith and Wesson bodyguard .380. I’ve had no failures with it through 500 rounds. Slide holds open more reliably than with factory mag springs which don’t work well out of the box. Would like to order another Magguts set.

  36. Shane T. (verified owner)

    Very easy to install. Great being able to pack one more into these little hand guns.

  37. David A. (verified owner)

    Fairly simple to install. Worked as advertised. Had to seat magazine into the gun firmly to catch.

  38. Brandon B. (verified owner)

    Great product

  39. Don O. (verified owner)

    Purchased the MagGuts springs to increase the number of rounds in the magazines for the .380. They worked perfectly even with the Adams Grip extensions I used to replace the original floor plates. Thank you MagGuts.

  40. Mike C. (verified owner)

    Work like it should

  41. Andrew S. (verified owner)

    At first I received the wrong product, but after I emailed the company I had a response email within an hour on off peak time. The ordered product was shipped out expedited with a return address label included. I will definitely order from them for future needs.

  42. Steve F. (verified owner)

    I purchased 3 sets of MagGuts , easy to install and they work great!

  43. David C. (verified owner)

    This is my second – I bought the first to see if they work and it worked so well I outfitted my second mag with one. There’s some serious engineering that went into the design. Being able to add an extra round without changing the size or shape is great. I’ve put about 200 rounds through wach magazine with no issues. Installation is a breeze if you follow the instructions and get all the parts in the way they are supposed to be. It’s not hard but like any mag, some parts will fit backwards. Pay attention and yours should work as well as both of mine do. 7+1 is a worthwhile enhancement to me.

  44. Arthur B. (verified owner)

    I like that I’ve added extra round to each of my pistols. I’ve about 60 rounds and have not had a problem. I liked the kit for the BodyGuard better and it was easier to install than the Shield. Liked wire spring plus strip (wider spring). As opposed to only the strip spring for the Shield. So far so good

  45. Thomas S. (verified owner)

    Item works as expected. Easy install.

  46. Mark S. (verified owner)

    Bought 2 of these for Bodyguard and they fit very well and added an extra round to the standard mag.

  47. Art M. (verified owner)

    Great product, simple to install!

  48. JS (verified owner)

    I just recently purchased a brand new BG .380 and it would not hold the slide open on the last round. Nor would it stay open with just an empty magazine installed. Smith and Wesson has a serious issue with the cheap plastic orange followers they install in BG .380’s. I have three Smith and Wesson magazines and none of them work correctly. This product instantly corrected the issue. Not only that, it also correctly pushes the magazine out when engaging the magazine release. Aside from the benefit of adding an additional round, the gun functions 100% better. MagGuts is an amazing product. If you’re having similar issues with your BG, this will fix it! I’m getting ready to purchase another set for my second mag.

  49. Tracy G. (verified owner)

    You really have to push the mag in to get it to lock in, but overall a great product.

  50. Stuart C. (verified owner)

    works as advertised.

  51. RICHARD H. (verified owner)

    Ordered 2 kits for the Bodyguard and am very pleased with the results. I’ve ran about 200 rounds of my handloads through it and have had zero issues. I did take the time to watch the instructional video and would highly recommend doing that before attempting to assemble.

  52. Alan G. (verified owner)

    new purchase but 300+ rounds so far, no problems!

  53. Don G. (verified owner)

    after watching the installation video, it was easy to install. at the range i had one failure to feed….not sure what that was all about, but will put another couple of hundred rounds through before using in carry gun. overall, i’m impressed with the quality. would buy again.

  54. Jeff R. (verified owner)

    Works perfectly. No issues in my Bodyguard. Installation takes a bit of thought but just take your time and it will make sense. Neither the video or the instruction card that comes in the package are fully up to date.

  55. Brian (verified owner)

    Well, I bought two and they installed easy enough and they had the extra round nicely. I had a concern that part of the bottom plate rested out of the magazine. I guess that tip that fits the bottom piece was supposed to hold it. My concerns were validated on the first day at the range. It functioned well until I practiced mag changes. Somehow that tip on the base plate worked its way out of the bottom cap. Not surprisingly, rounds would not load. I took it apart to fix it and in true spring fashion, stuff went everywhere and I lost they cup between the two springs. Maybe me it will be good as long as it does not roll around in your pocket. But I think I will go back to the factory spring. 7 rounds I have faith in is better than 8 rounds I hope work.

  56. Brett E. (verified owner)

    Worked out great I think you need to send out a little better directions the ones I got were on the package but they’re so small you can hardly see him but besides that it worked great .

  57. Garry A. (verified owner)

    The product works well. Thought occurred to me. could magguts be used to convert lcp mags into lcp2 mags which would hold the slide back after last shot? If so, another add point.

  58. Allen C. (verified owner)

    This is great, not sure why the factory doesn’t squeeze in that extra round but its works good, also added to my Sif P238 mags. Only downfall is it takes a while to get.

  59. Nick H. (verified owner)

    Magazine extender added a round and feeds properly. Perfect!

  60. Jay B. (verified owner)

    Great product

  61. Joseph F. (verified owner)

    Purchased 3 for my bodyguard. 2 fit perfect, one base was slightly off. I called and explained the situation. They had a replacement shipping the next day. I also ordered a 4th at the same time. It’s nice to have that 1 extra round in a small gun. Nice job MagGuts.

  62. Jim G. (verified owner)

    Overall…..it works and functions smoothly. Instructions could be better because of updates made to the spring assembly. Older instructions were included. I used a video on YouTube to assemble the magazine.

  63. Eugene T. (verified owner)

    Set for S&W B.G. works fine,as advertised.

  64. Kurtis S. (verified owner)

    Good product

  65. Vincent G.

    My first attempt to install failed but I finally got it right. Works perfectly. Feeds every time with no issues. I feel more confident having the extra round ready to go.

  66. Arthur D. (verified owner)

    problem 1) follower does not always hold the action open 2) follower will jam (or rack) in the mag body, thus not feeding.

  67. Matthew K. (verified owner)

    This little guy is amazing. Works as promised and is super easy to install. Took me less than 5mins in total, probably. The magazine cycles correctly and I have my promised +1 cartridge. This is a really great product and is hard to beat. For such a small cost, I get to keep the original mag and have more capacity. Great stuff!

  68. Humberto H. (verified owner)

    Would highly recommend this item, wish it had clearer instructions but if you have any common sense you should be able to get it.

  69. Dave S. (verified owner)

    Jammed up at the range, unreliable and dangerous. Tossed in the barrel.

  70. Doug H. (verified owner)

    1st clip took some time, second one much eariser. Magguts how to video is the best.

  71. John L. (verified owner)

    Overall pretty good product – provides an extra round with no increase in magazine size or loss of functionality. I ordered 2 kits, 1 kit fit great but the second would not allow mag to seat in loaded pistol. I emailed Corso, they replied quickly with troubleshooting tips. These did not help, so I requested a replacement, which was sent promptly along with a prepaid return address label (you might consider opening your order envelope carefully just I case you need to reuse it). Replacement worked fine. Pay careful attention to assembly instructions, also there are some videos on YouTube that might help.

  72. Daniel O. (verified owner)

    The +1 works right, I had to email and get a replacement follower because the one originally sent to me was defective. Magguts took care of it no problem. I would give it 5 stars if the kit was a little cheaper.

  73. Chris F. (verified owner)

    Easy to install, runs great, nice having an extra round !!

  74. Jason R. (verified owner)

    I’ve used the bg 380 +1 conversion for years, but one I just put together flew apart when I loaded it. I wish the bg380 spring was as robust as the new shield design. Would make me more confident in it.

  75. Jason W. (verified owner)

    Super easy to install. Deciphering a picture of a spring can be difficult, but if you get it wrong and it doesn’t work, just flip it around the other way. If you need more help than that, there are several YouTube videos to watch. I put a bunch of rounds through without a hiccup. I also tried dozens of times to make sure it feeds properly while racking. It feeds perfectly, even while slow racking, unless I slow rack with the last round in the magazine, but for what it’s worth, even the factory magazines jam on that last round. It was never meant to be operated that way anyway. I just always like to really test things out by going beyond the scope of normal operation. Bottom line, if one extra round in your magazine is worth the $23, don’t think twice and grab one. I look at it this way: If I ever needed that seventh round after I spent my six and did not have it available, there isn’t a dollar amount I wouldn’t pay to have it in that moment. It’s a no-brainer for me.

  76. Tom H. (verified owner)

    Does what it’s designed for and does it well. Chambers rounds flawlessly. This is my 3rd magguts they all work well.

  77. Joshua J. (verified owner)

    Great quality product at a reasonable price!

  78. Dan F. (verified owner)

    Baseplate is a tight fit, but they work great!

  79. Scott M. (verified owner)

    Works great even with my shield recommend will buy more

  80. Casey M. (verified owner)

    Terrible product. It broke multiple times when test firing it. Would not trust it or buy again.

  81. Jeff H. (verified owner)

    Put 157 rounds through the springs with 0 failures. With the extra round it was very hard to jam the magazine in. I think the tight fit problems will occur. I have went pack to the factory speced magazine. Reel it will be more reliable in the long run.

  82. Richard B. (verified owner)

    I purchased the Ruger LCP II and the S&W Body guard Mag Guts. Both did extend the Mag capacity by one round. But both have poor design on the lift plate (the plate just under the round). on both you cannot insert an empty Mag into the gun for the lift plate cocks and jams before it inserts. The body guard lift plate jumps out of the housing an requires carful positioning to load ammo into the mag. Once the mag is emptys it is a 50/50 chance it wild lock the slide back. I believe it is all in the lift plates and Mag guts needs to rework there design. also on My Body guard this mod worked with my oldest mag but the bottom base plate would not latch on a new 2018 OEM mag.

  83. John A. (verified owner)

    Great product took less then 2 minutes to install.

  84. A W. (verified owner)

    Would not lock slide back after last round. Fired 50+ rounds and never locked back

  85. Edgar Flotte (verified owner)

    Instructions are not clear and couldn’t find a video. I hope I assembled it correctly as this is different than the older models and there is nothing out there that shows the correct orientation.

  86. Howard (verified owner)

    Not yet finished installing it. Picture clarity worse on this one than Shield 9. Very difficult without a vise to hold it while trying to get all parts together in proper order. Did not get 1st time order 10% discount either.

  87. John Hall (verified owner)

  88. Olivia (verified owner)

    Works as good as the stock mag and gives you one more round….just in case!!!👍

  89. Jeremy Snider (verified owner)

    Did not engage my slide lock. They sent me another one and it worked great. Nice to have an extra round with the stick profile. Great customer service.

  90. Dennis Corbett (verified owner)

  91. GREGORY S. (verified owner)

  92. Casey Nix (verified owner)

  93. William (verified owner)

  94. John P. (verified owner)

    Same as above so far so good . This will gain stars over time depending on reliability.

  95. Anonymous (verified owner)

    Simple installation & reliable function during range time. I would trust this for an EDC magazine.

    No issues. Very satisfied.

  96. john loy (verified owner)

    These don’t work in my magazines!

  97. Richard (verified owner)

    Really happy with this product, it was easy to swap out the factory parts and install the new “guts”. 7th round loads just as easily as 1-6, I was worried it would be difficult to get in. Mag functions perfectly, all 7 rounds feed reliably and the slide locks open when empty.

  98. James (verified owner)

    Great product, easily installed. Bought one, so easy to install, ordered two more right away.

  99. SAMUEL (verified owner)

    After two 100-plus round range trips, I can say the MagGuts for the M&P Shield work just as advertised. well worth the money, and excellent customer service as well.

  100. Tom T. (verified owner)

    Added 3 more to my collection. These went in better than the first.

  101. Todd Sanders (verified owner)

    I love the product, It took a little while to get the spring lined up inside so it wouldnt bind. Found a YouTube video that really helped.

  102. Thomas (verified owner)

  103. Steve (verified owner)

  104. Anonymous (verified owner)

    Great piece of gear. Easier than I expected to assemble into my BG .380 clip.

  105. Eric (verified owner)

    Absolute garbage! These products do not feed any type of ammunition properly in my Smith & Wesson 380 Bodyguard or my 40SW Shield. Good luck with customer service returning your phone calls or emails.

  106. Anthony Z. (verified owner)

  107. Felix Boston (verified owner)

  108. Timothy B. (verified owner)

    Best pistol accessory I’ve ever purchased! Installation was simple and the product works flawlessly. It was a little stiff getting the first mag in the pistol with the extra round in it. However, after the first time I emptied the mag at the range, everything must’ve settled in. Now the Mags load/release perfectly. The ability to carry 8 rounds in a pocket pistol the size of the S&W bodyguard is amazing. I can’t believe the MagGuts wouldn’t be a must have for anyone carrying a small pistol.

  109. Ray Lewis (verified owner)

  110. Joshua (verified owner)

    Easy to install, works good. Leaves smaller profile then some other brands.

  111. Charles P. (verified owner)

    Retainer button didn’t quit line up with the factory mag base. Took a little filing to get it to fit properly.

    The Last round is very tight for the Bodyguard Unlike the mag guts I have for my Klahr CW380 and my Sig238.

  112. Kyle W. (verified owner)

    Easy install and as advertised. Now holds 7rnds

  113. Miguel Torres (verified owner)

    Easy install in 2 min. AND GREAT QUALITY

  114. Michael (verified owner)

    Easily installed, works great, and with 7 rounds.

  115. Michael Campbell (verified owner)

    The pin that holds my magazine end on came broke, I can not put it in my mag secure because of this

  116. Jerry (verified owner)

    Works good

  117. Peter J. Bertini (verified owner)

    Not that I needed them, but I did have to study each kit for a bit to understand the install. There’s no excuse for not including a simple instruction sheet. Other than that, great experience, product and pricing.

  118. Jason Wilson (verified owner)

  119. Ron B. (verified owner)

    Installation was EASY!!! Can’t wait to try it at a range! Next up is my Shield.

  120. Stephen Williams (verified owner)

    I outfitted my bodyguard with the MagGuts kit and have been more then happy. It’s easy to install. And has a reliable feed. I Will definitely be buying more when I buy a couple more clips

  121. Christopher Gunn (verified owner)

    Great product

  122. Charles M. (verified owner)

    Cured the fail to lock open when empty issue I had with plastic follower.

  123. Joe Jones (verified owner)

    I was a little skeptical at first, but this is a great product! Instructions were clear and concise – easy to follow for a smooth, quick install.
    First range test with ball & defense ammo – fed flawlessly & the slide locked back on last round for both. Several mags down rang later – perfect! Proved to be very dependable – added to my EDC!

  124. Amedeo Guarino (verified owner)

  125. Warren Husted (verified owner)

    Could not make it work

  126. Thomas G. (verified owner)

    Great product and great service. What more can a person ask?

  127. Rich F. (verified owner)

    It was a simple matter to remove the old tired springs and install these new ones. Instructions worked great!

  128. David Bradley (verified owner)

    I ordered two of these. I had a minor problem with one of them snagging a hook in the mag latch slot and not feeding the 5th round. A small adjustment with needle nose pliers fixed it and both mags work great now.

    I’ve had one range trip so far and have run about 50 rounds through them with zero feed problems.

  129. Richard (verified owner)

    Quick delivery and exactly as described = Excellent!

  130. Richard (verified owner)

    Quick delivery and exactly as described = Excellent!

  131. Kevin WALLENHORST (verified owner)

    Good quality reasonably priced

  132. TyJuan L. (verified owner)

  133. Mario Lopez (verified owner)

    Great product for the price.

  134. Joel Wilburn (verified owner)

    Great product and great service. Delivered in timely fashion and product works as advertised.

  135. Bob K. (verified owner)

    Received and worked as advised easy to install

  136. Tim Shuttz (verified owner)

    Work as all magguts do. PERFECTLY!

  137. Mike Cooper (verified owner)

    The MagGuts showed up quickly and already assembled, unlike some of the videos I’ve seen where you have to figure out how to put it together. Item works great for adding an extra round to your magazine. Exactly what I wanted. I’ve taken it to the gun range and have not had a problem. Slide locks open on last round.

  138. Richard LaMothe (verified owner)

    Easy order, quick ship, added a little brother to my existing MagGut family…very pleased.

  139. Doug (verified owner)

    I like!

  140. Michael K. (verified owner)

    super easy install works great

  141. Anonymous (verified owner)

    Yet to receive my order. Bummed out.

  142. Ed C. (verified owner)

    These MagGuts are the best! The metal followers and spring designs make for very reliable feeding. I’ve used these in 12+ magazines at this point. Last conversation with a local gun shop owner he said he can’t understand why Magguts aren’t put in by the gun makers at their manufacturers. One additional round is one more chance to end a threat!

  143. Anonymous (verified owner)

  144. Anonymous (verified owner)

    With a little bit of modifications, I was able to use these for the Taurus Spectrum 380. I was able to convert two 6 round factory flush magazine to 7 rounds, and two pinky extended factory magazine from 7 to 8 rounds. Pleasantly, to my surprise, all the magazines hold open after the last round. A bit pricey but worth it.

  145. Nathan Thern (verified owner)

    Wow! Super easy to install, and does exactly what it says: +1 to the magazine capacity.

  146. Brian D. (verified owner)

    has been working great so far. Please make magguts for more guns!!

  147. Bill (verified owner)

    Easy to install and works perfect so far , I will be going to the range to complete my test. I will buy again.

  148. Vincent U. (verified owner)

    Easy to install by using online video

  149. Ransford Roberts (verified owner)

  150. John P. (verified owner)

    Simple, easy, worth the cash for 1 extra round, thank you.

  151. Mark Koba (verified owner)

    Love the product, the followers could use a tumble in some media to remove the sharp edges though.

  152. Gordon Weis (verified owner)

  153. Richard rambo (verified owner)

  154. Dexter Bartlett (verified owner)

    I ordered it more than ten days ago an still have not received it

  155. Robert Lidard (verified owner)

    They can be a little tricky to get in and lock the baseplate

  156. Nathaniel (verified owner)

    Ill be back again for sure!

  157. Michael Schneider (verified owner)

    Great Service! Performs flawlessly

  158. Anonymous (verified owner)

    The first magazine was a bit tricky, at first, because of the increased pressure of double springs, but the next seven were easier to install. I took them to the range the next day and they performed flawlessly in my S&W Bodyguard. Having an extra shell is piece of mind when carrying and for home defense.

  159. Joseph. S Kuss (verified owner)

    Satisfied . thanks

  160. Anibal F Pombo (verified owner)

  161. Robert Butler (verified owner)

    Much easier to assemble than before

  162. James Cannady (verified owner)

    A high quality product that works exactly as advertised.

  163. Derek (verified owner)

  164. Chris Islas (verified owner)

    Over all a great product and love the concept from 6 to 7 rounds, but tight to insert the mag into the magwell and you cannot hear a click. So I’m a bit selfconscience about that. Of course, I yet to fire my weapon at the gun range that’s when Ill know more about its performance.

    Thank you,

    Chris Islas

  165. jason puente (verified owner)

  166. Anonymous (verified owner)

  167. Josh H. (verified owner)

    Awesome!

  168. BRUCE (verified owner)

    Easy to install–works flawlessly 🙂

  169. Allan (verified owner)

    Excellent product

  170. Samuel Lynch (verified owner)

    Work very well-had to slightly bend the slide lock tab on one. Feed very well & lock the slide after last round! Great product! 👍👍👍👍👍

  171. Dale Glanton (verified owner)

  172. Dale Glanton (verified owner)

    Fast shipping

  173. gerald w. (verified owner)

  174. Anonymous (verified owner)

    Instructions were clear & concise. VERY easy to install. Functions GREAT !! I’ll convert ALL my handguns to MagGuts !!

  175. Gary (verified owner)

    Failures to feed; snagged pistol frame and or magazine. Didn’t offer to provide free return. Cost to return more than half the price of the produce. Will not purchase anything else from this company.

  176. William (verified owner)

  177. Eric (verified owner)

    Great product! Feeds and fits better than factory

  178. Steve Perry (verified owner)

    Works better than the factory! I love it, ordered another for my extra carry magazine

  179. Edward (verified owner)

  180. Anonymous (verified owner)

    Shipping could be cheaper and faster. Product is awesome.

  181. Steve P. (verified owner)

    Great product! Stronger spring than factory and feeds better. Went to the range, fired 100 rounds and it was flawless! Awesome!

  182. Jose R. (verified owner)

    Great product and easy to assemble. Works great!!

Only logged in customers who have purchased this product may leave a review.