MagGuts M&P Shield 9mm Magazine Extension

ASM005
(76 customer reviews)

$14.95

MagGuts™ M&P Shield 9mm Magazine Extension

-Adds 1 round when used with OEM magazine internals.
-Adds only 1/4″ to the magazine length. Just enough to get a secure pinky grip without adding any significant size.
-Molded design matches Shield frame.
-Very easy to install.
-Not compatible with current production +1 MagGuts springs to yield +2.
-Patented.

SKU: ASM005 Categories: ,

76 reviews for MagGuts M&P Shield 9mm Magazine Extension

  1. Scott F. (verified owner)

    I dropped my Gen 1 magguts magazine and the magazine popped apart, shooting the cup that held the top spring rested in shot off, flying somewhere to never be found. I contacted Magguts and they couldn’t help me get the parts I needed. I purchased the Gen 2 as a replacement and it works well and is easier to install than the old model. I must say I am more disappointed in Magguts that I am the product (at least this generation of product)

  2. Allan W. (verified owner)

    I traded my 8 round Shield factory mag for a 7 so I could use the Maggot base plate. Why did I trade for the factory 7 rounder? With the Maggut’s* bottom plate the mag holds 8 rounds. It is long enough to get my little finger on. And the mag drops free when released.

  3. Jeff H. (verified owner)

    Bought these to make my 7rnd mags 8rnds. So far they have been super reliable with feeding and hold the slide open on the last shot. Stout build quality and wouldn’t hesitate to use it in an EDC.

  4. Arlen N. (verified owner)

    Have used these now for a year and half, thousands of rounds, no problems whatsoever. Greatbpridict. Thanks.

  5. Todd H. (verified owner)

    The +1 magguts for my Sheild has an ugly gap between the grip and magazine floor plate. Additionally , when the 9th round is loaded the spring tension is such that a round can not be stripped from the mag and chambered. I am contemplating purchasing the +2 to hopefully avoid this issue.

  6. Tom C. (verified owner)

    Spring should be included

  7. Kiki Q. (verified owner)

    extends your 7 rounder to 8!!! adds only 1/4 inch or so…..;0)

  8. Arthur D. (verified owner)

    It works well only adds about a quarter inch to the magazine.

  9. Jerry L. (verified owner)

    I bought the mag extensions without the spring to add an extra round to both my 8 round shield mags.Install was straightforward and simple.I finally tested them yesterday 50 riunds through each mag with no feeding issues at all.These function well.

  10. Mark H. (verified owner)

    I bought the 2 plus kit for an M&P Shield. It does exactly what they said it would do and works flawlessly. Hard to believe I can have 10 rounds in a shield magazine! The price point is a little high, but it works very well. I will be ordering another kit.

  11. Natalie M. (verified owner)

    What to add an extra round to your carry magazines? This product will do that with only adding a quarter of an inch to your magazine length. Two thumb up for extra self protection!

  12. Ross L. (verified owner)

    It made my Smith & Wesson Shield a 10 round mag and made My Bodyguard 380 a 7 round mag. Awesome product

  13. William B. (verified owner)

    Great product!

  14. Gene G. (verified owner)

    4/19/18: I’ve built a tool to install Z Springs into S&W M&P Shield 9 Mag’s (OEM Mag. Big thanks Steve for your help.

  15. Mathew W. (verified owner)

    Works great

  16. William h. (verified owner)

    Perfect. And quick. Just need more gun models lol

  17. Harry V. (verified owner)

    works perfectly well made quick shipping what more can you expect thanx

  18. Frank R. (verified owner)

    Solid design and have had no issues feeding, will be tight to get that extra round in but leaving it loaded will help the spring settle in

  19. William M. (verified owner)

    seems to work, range work in progress, may report back.

  20. Stanley S. (verified owner)

    Will not lock when empty otherwise works well with 10 rounds in shield

  21. Clayton M. (verified owner)

    Perfect

  22. Mike B. (verified owner)

    Bought the +2 for the shield. Working as advertised.

  23. Edward P. (verified owner)

    After installing the Mag Guts the magazine would not drop down without being pulled out. Took my S&W out to make sure it fired properly and thank goodness no issues there. If I can’t fix this these 2 Mags will just be training mags.

  24. Stephen A. (verified owner)

    Extension turned 7 round mag with Magguts spring into a 9 rounder adding minimal length.Have not tested yet but mag worked fine with spring only mod.I expect the same with extension.

  25. Sean P. (verified owner)

    The follower pops through the top of the magazine at times. Upon firing the last shot of the magazine the slide doesn’t lock back on any of the magazines that has magguts components.

  26. Michael M. (verified owner)

    The new mag spring and extension takes my 7-round flush mag and extends it to 9 rounds with only a little bumb past flush. Now with one in the chamber, my weapon carries 10 rounds with minimal expense or loss of concealability.

  27. Tim W. (verified owner)

    These extensions are well made, and coupled with the Shield flat “Z” springs, make it easy to load 10 rounds into the venerable S&W Shield—-Finally, an excellent solution to a true 10-round single stack 9mm…..Nicely Done, MagGuts!!

  28. Harry Scott (verified owner)

    Excellent service ! Delivery was on time, and the item was exactly as advertised. Assembly was simple. I have only had time to test fire it once, but so far it works perfectly. I have bought several items from MagGuts over the last three years and have always been very satisfied with their product.

  29. Wayne Naugle (verified owner)

  30. Anonymous (verified owner)

    Great product and amazing customer service!

  31. Jacob Bottolfson (verified owner)

  32. William Calhoun (verified owner)

    I can only give it a 4 because I have not tested it yet. It was easy to install and from all I have read from other reviews it will work perfectly fine.

  33. DAVID (verified owner)

    Easy to install and extents grip more than flush mag and less than 8 rounder. It gives you 1 extra round and a nice 3 finger grip. You also have the option to remove the stock spring and follower and put in the Magguts spring and have a 9 round mag. Shot 50 rounds so far and perfect function. Sell that 8 round stock mag and buy 7 rounders and put in this extension.

  34. DAVID (verified owner)

    Very easy to install. Makes that 7 round magazine an 8 rounder with enough room for a solid 3 finger grip that is slightly shorter than the stock 8 round magazine. Also have the option to add the Magguts spring to get 9 rounds.

  35. Michael Brown (verified owner)

  36. Mark Vasquez (verified owner)

  37. Luis Urena (verified owner)

  38. Werner Herb (verified owner)

  39. MICHAEL (verified owner)

    products easy to install and very well constructed with no complaints. would purchase again.

  40. THINH DAM (verified owner)

  41. Harry Scott (verified owner)

    My purchase completes converting all three of my seven round Magazines to 8 rounders. I have found your product to be very reliable. In addition to the extra round, the quarter inch the extension adds gives me a full grip which improves my shooting. Installation is simple, but not easy due to the strength of the spring. Still, I was able to install your extension in a matter of three or four minutes. I am very happy with your product.

  42. Ed Gabbert (verified owner)

    How come mine cost me $17 and not $14. Other than that it’s a great product. I would like to see it for a 1911 to.

  43. Dallas A. (verified owner)

    Works great good quality

  44. Nicholas Ramirez (verified owner)

    As always awesome product

  45. Daniel (verified owner)

    I’m mostly pretty happy with it. There is a gap in the coverage at the back, which the real McCoy does not have. That would be a nice thing for them to fix, with the design. However, it was easy enough to install, and makes the front part extend the grip, just like the longer mag, and increases the capacity one, as promised. Although that final round is tighter than in the long one that came with the pistol. If I had it to do again, I would probably just pay for another of the longer factory mags. I do not know whether I will get their springs for another extra round each, or not.

  46. Jorge Oviedo (verified owner)

  47. Anonymous (verified owner)

  48. Juan Echeverria (verified owner)

    👍

  49. Donnal Chung (verified owner)

    I ordered a week ago I still don’t get it product yet

  50. James Walsh (verified owner)

  51. KEVIN H. (verified owner)

    I used this to convert my 7 round factory mag to 8 rounds. It adds just enough length so that I can get my pinkie on the grip, so much better with that mag. Took 15 seconds to install and functions flawlessly.

  52. George (verified owner)

    Added to my Shield 7 rd mag. Worked great with minimal added to length of grip.

  53. craig (verified owner)

    Awesome fit and give the gun a clean look

  54. Charles Shaddix (verified owner)

    Works great. Assembly a bit tricky but easy once you figure it out.

  55. Karen (verified owner)

    I had trouble installing the +2 kit in my 7 round Shield mag and broke the base pad (my fault!), so being able to buy this saved me some money. I’m 68 and my hand strength isn’t what it used to be, so keeping the spring compressed while trying to put this on was very difficult. I finally put the mag in a vise to free up my left hand, this made it much easier and I was able to do it without any problems. Function has been 100%, and I feel much better having 10 rounds instead of 8. Very happy customer, thank you so much!

  56. Jurbar Williams (verified owner)

    It works great

  57. Lawrence Wolf (verified owner)

    Finally got it to accept 9 rounds. then at the range, it will only accept 6 rounds. I put this in my Shield 7 round magazine that I had already put a maggutz spring system that gave me 8. I bought this so I could get nine. Anyhoo, I’m frustrated at the moment. I’ll continue to futz with it and at the end if I can only get 8 reliable in there, I’m happy ’cause I at east have thak

  58. Marvin (verified owner)

    Everything went well with the purchase! I love the Shield extension because it doesn’t add much length but gives a full 3 finger grip while adding one round.

  59. Steven H. (verified owner)

    Fit and finish was great and it took another round as it said it would. What more could you ask for ?

  60. Steven H. (verified owner)

    Works great 2nd one I ordered

  61. Jesse A. (verified owner)

    I like that almost all of the original mag parts remain intact, for those who prefer factory OEM magazines. Easy installation, looks good, and works well. It also improves on gripping the pistol with the small additional length added to the 7-round magazine. Very happy with this and would recommend to others.

  62. ruperto f. (verified owner)

    What a fantastic product. I was previously using a competitions brand extension which gave me a 9 round capacity. But made it slightly longer than your +2 system. I’m back to easily concealable mode using an OWB holster. Also has a nice finish to boot. I had to file away some material from my 8 round spacer to make it perfectly flat to the extension. But that’s just my liking.

  63. Darren Southard (verified owner)

    Very easy to install, fit and Finnish are great, and does exactly what they say it does. Great product

  64. Jason Williams (verified owner)

    Great product , very fast shipping!

  65. Anonymous (verified owner)

    Perfect it works well worth the money.

  66. Anonymous (verified owner)

    Excellent solution !

  67. John Wulff (verified owner)

    This one only gives you 9 rounds. Once I found out I bought the other one with the spring and everything. It’s more expensive but well worth it. Only takes a couple minutes to do.

  68. Michael Stover (verified owner)

  69. Jeremy Lamano (verified owner)

    Works as described.

  70. Charles A (verified owner)

    Had bought previously. Love the design and compactness.

  71. Bryan Y. (verified owner)

    Works like it should and adds just enough length for my pinky.

  72. leo chavez (verified owner)

    working as intended. was easy to install

  73. Andrew R. (verified owner)

    Great product. They even worked on my promags.

  74. TC Collier (verified owner)

    I know it says it’s for 9mm but it works for the 40s&w as well. I have 4 in both 9mm and 40 and they work flawlessly.

  75. Anonymous (verified owner)

    Showed up fast and as advertised.

  76. MARK (verified owner)

    works great.

Only logged in customers who have purchased this product may leave a review.