Walther PPS M2 MagGuts - 7 Round Magazine
Walther PPS M2 MagGuts - 7 Round Magazine

Walther PPS M2 MagGuts – 7 Round Magazine

CVN029
(77 customer reviews)

$23.95

Walther PPS M2 MagGuts™-High Capacity Magazine Conversion

Converts your 7 round Walther PPS M2 9mm magazine into an 8 round magazine without extension. The kit uses your existing magazine tube and base while replacing the follower, spring, and lock plate with MagGuts™ components.
This conversions features our Hybrid Spring System consisting of a flat spring that compresses inside of a wire spring which maximizes space utilization and minimizes compressed height. The result is a very simple and space efficient spring that allows room for that extra round while maintaining necessary force.
*Compatible with OEM 7 round magazine only.*

-Very easy to install.
-Extremely reliable feed and slide lock.
Includes hybrid springs, follower, and lock plate. Magazine not included.

Out of stock

SKU: CVN029 Category:

77 reviews for Walther PPS M2 MagGuts – 7 Round Magazine

  1. Jeffrey Z. (verified owner) –

    I’ve installed the Magguts in one 7-round PPS M2 magazine and one 8-round. Installation was pretty quick, and although I’ve only run about 30 rounds through each, about half FMJ and half HST JHP, both have been perfect so far.

  2. Henry M. (verified owner) –

    It’s great to be able to put 8 rounds in a 7 round magazine. They are a little finicky to put together. Follow the directions closely! I found that some of them work better with the upper spring turned 180 degrees in the mag. Otherwise once they are put together and working they functioned flawlessly. My Walther eats every type of ammo I put in it with the new Mag Guts!

  3. William K. (verified owner) –

    Converted my 7 round PPs M2 to 8 rounds capacity. Put a box of ammo through it without incident. Very pleased.

  4. Chris (verified owner) –

    I ordered one 7 round and one 8 round magguts for my Classic PPS. The 7 round worked flawlessly. Worked with a variety of hollow points and locked open when empty. The 8 round magguts unfortunately do not work in the Classic PPS 8-round magazine. But Magguts exchanged if for a second 7 round magguts so I’m very happy.

  5. Mark D. (verified owner) –

    I was able to upgrade my factory 7 round mag to an 8 round mag, all for less than the cost of just buying a new mag outright. I can’t wait to try out this at the range!

  6. Aaron M. (verified owner) –

    Got my guts way faster than expected! I purchased both the 6 round and 7 round extensions. Put like 50 rounds through both at the range. Everytime it fed flawlessly. Would absolutely recommend these to anyone looking to up their carry amount in their gun. Great craftsmanship of all the parts, overall highly pleased.

  7. Alexander S. (verified owner) –

    Installed these in my original Walther PPS 40S&W 6rd mag and 7rd mag. Shot 150rds through each magazine with no malfunction other than the slide lock not engaging three times. Great product.

  8. Daniel W. (verified owner) –

    I love the upgrade. Easy to install. No feeding or function issues.

  9. Christopher S. (verified owner) –

    Purchased the 7 to 8 round mag conversion. Works great so far and quick to install. Just pay particular note to the instructions and pictures. Specifically says” install as depicted.” One spring installs against what your common sense tells you. Just follow the picture!

  10. Ed L. (verified owner) –

    easy to install following instructions, can also YouTube if you need a visual. Took it out to the range and it worked flawlessly. Hope to get a few more rounds trough it before I’m comfortable to EDC.

  11. Shane (verified owner) –

    Well designed and works as advertised. I have all three versions for the Walther PPS M2 6,7, and 8 round mags. I’ve put over a thousand rounds through my plus one converted mags with no failures of any kind. They are also easier to load. Thanks guys for making these for the 7 and 8 round mags also!

  12. Eric U. (verified owner) –

    Why aren’t more people using these? This works flawlessly in the 7 round magazine of my PPS M2 which now allows me to carry 8+1 rounds with the same mag.

  13. Michel M. (verified owner) –

    Perfect for my magazine and easy instalation and fast delivery

  14. Brian E. (verified owner) –

    Nice idea, but top plate falls out every time the last bullet is ejected. Would not recommend.

  15. Thomas V. (verified owner) –

    Good invention.

  16. Joshua B. (verified owner) –

    This spring kit feels more durable than OEM springs and add additional functionality. Fantastic product!

  17. James A. (verified owner) –

    After failing to make a cut-down factory follower work (it popped out of the mag too easily), I tried the MagGuts kit for the Walther PPS M2 7 round mag. The factory 8 rounder is too long to be practical, so adding an extra round into the 7 round mag seemed the best option. Installation was pretty easy. The graphics and narrative on the instructions were easy to follow. The last round was a bit difficult to load in the mag, but after a couple days of leaving the mag stuffed full, it became easier to load the eighth round. Even when the last round was difficult to load, there were no issues with feeding, ejection, or the slide locking back on an empty mag. Loading the gun from slide lock or with the slide forward presents no challenges. After 500 rounds, the magazine still functions flawlessly.

  18. Matthew H. (verified owner) –

    The malfunctions are not worth the extra round.

  19. Michael L. (verified owner) –

    7 round extension works great, easy to install. 6 round extension a little more difficult.

  20. Dennis K. (verified owner) –

    I now have MagGuts in all my Walther PPS M2 magazines – 6, 7 & 8 round all now increased by one. These install in under a minute, and I’ve never had a problem – all work great from the beginning. Highly recommend!

  21. Ido S. (verified owner) –

    Easy to install, just pay attention to the instructional video. Worked really well at the range. Hopefully it will last at least as long as the factory spring does.

  22. RICK T. (verified owner) –

    I really like having a extra round with out changing the look of the OEM magazine.

  23. Tim W. (verified owner) –

    This small modification was just what I needed. It was simple and efficient. Install is very quick and not difficult. There isn’t many magazine options for the pps m2. The factory 8 round magazine was a little too large and excessive. The mod gave me the capacity of 8 rounds in a smaller magazine which I like because bulk isn’t added. I plan on purchasing the 7 round spring for the 6 round oem magazine next! Will definitely purchase from again!

  24. Roman A. (verified owner) –

    Had some hang up issues with the springs during installation, but after a few minutes of toying with it I finally got them to seat properly under the ammo plate,now have to see how well they feed at the range

  25. Trey B. (verified owner) –

    Install was super eas and the mag seems to work perfectly. I am hopeful that it will hold up to extended use over time.

  26. Anonymous (verified owner) –

    Tracking numbers would be nice

  27. Roland (verified owner) –

  28. Anonymous (verified owner) –

    Easy to install. Works perfectly.

  29. Michael Williams (verified owner) –

  30. Robert Quackenbush (verified owner) –

    Quick and easy to install. Works Great.

  31. Billy T. (verified owner) –

    PERFECT!!!

  32. Raul H. (verified owner) –

    This kit was pretty easy to install. Works great. It’s reliable. Worth it.

  33. Michael D. (verified owner) –

    Product works great! High quality and solid spring kit. Tracking info provided was way off but I still received my package in a timely manner. Would order again. Good stuff

  34. Johnny Coffman (verified owner) –

  35. Brandon (verified owner) –

    Very easy install and great product

  36. Anonymous (verified owner) –

  37. Robert S. (verified owner) –

    Easy to install. Watch the video by Magguts. Working great. Have about 300 rounds through two 7 to 8 round upgrades. No problems.

  38. Michael (verified owner) –

    Awesome product.

  39. Richard (verified owner) –

    I have been using MagGuts in all my PPS magazines ever since they introduced them for my gun. I have put many thousands of rounds through them with absolutely no failures in any of the models (6, 7, or 8 round mags). Not only do I get an extra round but the mags are easier to load. Thanks for a great product!

  40. James D. (verified owner) –

    Works perfectly. Easy to install, video how to was very helpful.

  41. Stephen (verified owner) –

    I think you design people should try to install these spring with an eye on the customers safety. The springs cut me twice during the installation.

  42. Andrew C. (verified owner) –

    Easy to install and provides reliable feeding. Used at a class and had 0 malfunctions. Well made product.

  43. porter martin (verified owner) –

    performance is as claimed.. thank you

  44. Karl (verified owner) –

    Easy to install and works well.

  45. Craig Hodge (verified owner) –

    8rd mag ext for Walther PPS 2 works great. Easy install/ fast shipping

  46. Perry (verified owner) –

    Brilliant. 7-round version absolutely does work in the PPS M1, if there was an 8-round version for the M1 I’d buy two more.

  47. David P. (verified owner) –

    Works great! Timely shipping. I would buy another one.

  48. Greg P. (verified owner) –

    Does exactly as advertised. I ran the upgraded mags with many rounds with no failures of any kind. Recommend!

  49. Edgar R. (verified owner) –

    excellent product

  50. Barry (verified owner) –

    I would have given this 5 stars but the spring seems to be the same size as the one for the 8 round mag (I bought one of each for a 7 and 8 round magazine). It was very difficult to get the heel on the mag and I was worried I would cut my finger trying to press the ribbon spring into the mag case. It kept popping out and almost flew across the room a few times. Everything seems to work fine and the pressure from the bullets seems ok too. I just need to take it out and shot it to be 100 sure of it. That said, I think it will work fine. Just be aware that you are in for a wrestling match getting that spring in the last little bit. Make sure you have a good grip on everything and make sure you know how the body of the mag locks into the heel. That will help you a lot.

  51. John Daly (verified owner) –

    I have never received my purchase

  52. Keith E. (verified owner) –

    Watched the video and assembled carefully. No problems, no jams to date.

  53. Mark T. (verified owner) –

    Terrific product. I have to admit it was more of a challenge to install than I expected, but much easier to install than the 6 round version. 100 rounds through the mag, no issues. Great product, really great customer service. Bought a number of these for my Kahr K9 with very much the same range performance experience.

  54. LLOYD B. (verified owner) –

    As always, great upgrade! More rounds and smoother operation than OEM after alignment of spring to the follower and a couple of cycles.

  55. Anonymous (verified owner) –

    Have bought several of these for my magazines now and enjoy the capacity they add. Have put 500+ rounds through the gun with 3 converted magazines and no feeding issues.

  56. Kevin Marinellie (verified owner) –

    My 8 round (now 9) mag with mag guts failed during my first range trip so for that reason I will not trust these for my edc now.

  57. Stephen Fogg (verified owner) –

  58. Thomas MATT (verified owner) –

  59. Richard L. (verified owner) –

  60. Jacob H. (verified owner) –

    works as advertised

  61. Lee Hayes (verified owner) –

    I received this email before I received the products listed. I would be happy to give some better feed back once I have had a chance to install and test the products.

  62. Lane Deghand (verified owner) –

    I ordered this kit for my Walther pps 7 round magazine. The youtube video was extremely informative and detailed. I took it to the range and fired 250 rounds of ball and hollow point ammo. So far no malfunctions of any kind and it locks open on the last round fired. I ordered 2 more kits of the exact same and have been very impressed! Good job Magguts!

  63. James O. (verified owner) –

    Great product. My fourth order.

  64. DANIEL FRANCIS (verified owner) –

    I received a completely different magazine and am waiting to hear back from customer service.

    • admincorso (store manager) –

      Sorry for the shipping mistake! A new conversion is on the way along with a return label for the one we sent in error.

  65. Brian S. (verified owner) –

    I did not receive this kit yet, a Sig 365 was sent instead.

  66. Daniel Torres (verified owner) –

    unfortunately doesn’t work well. I bought 3 units and only 1 worked (after some manual adjustment). I think that needs some clip type solution to keep the upper spring attached to the follower

  67. Bernard N. (verified owner) –

    Poorly designed and does not work. Edges are extremely sharp and drew blood during install. Follower bids and rounds are stuck in magazine. Had high hope but was extremely disappointed.

  68. Furman Whitaker (verified owner) –

    Nice product good service!

  69. Aaron Graves (verified owner) –

    Works great but pay close attention to the install video! I missed a very critical step and had some issues at first. Great support by the company to get me back to good!

  70. Ardis J Henderson Jr. (verified owner) –

    Very nice very very nice 👍🏾

  71. Philip (verified owner) –

  72. Ryan H. (verified owner) –

    Did exactly what they said it would def a little tricky getting the first mag back together with magguts spring but my suggestion is do it with mag on a flat surface so u only worry about the spring coming out one side

  73. Cristian Veneziale (verified owner) –

    Very good magazine spring

  74. Larry K. (verified owner) –

  75. Ross McKenney (verified owner) –

    Relatively easy to install, functions well. Stiff reloading quickly gets better with a few cycles. Great invention!

  76. Brian (verified owner) –

    Installed incredibly easy, and seems to function correctly. However, my experience with two other kits has been negative and I have zero trust in their durability or long term function. I’m switching back to the factory springs.

  77. Ray Feliciano (verified owner) –

    It wasn’t worth the trouble of installing to gain one round, I ended up throwing it in my parts bin

Only logged in customers who have purchased this product may leave a review.

Related products